NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.
OWC
32 GB DDR4 ECC registered server memory running at 2933 MHz with CL21 latency and 1.2 V operation
This 32GB DDR4 2933MHz module is built for servers, workstations and NAS systems that require ECC registered memory. It uses a 288-pin RDIMM form factor with a 2Rx4 rank configuration and operates at 1.2V. The module is not compatible with standard desktop computers or unbuffered memory.
The single 32GB stick adds substantial capacity for virtualisation, large databases or memory-intensive workloads. It runs at PC4-23400 with CL21 latency and will down-clock to 2133MHz, 2400MHz or 2666MHz when the platform demands it. Systems needing more than 32GB per slot or higher frequencies than 2933MHz will need different modules.
The DDR4 RDIMM standard tops out at 2933MHz in this configuration, so bandwidth is capped at PC4-23400 speeds. Registered signalling adds a clock cycle of latency compared with unbuffered DIMMs, which is normal for ECC server memory. The 288-pin keying prevents installation in desktop UDIMM slots, and the module cannot be mixed with non-ECC or unbuffered memory.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Yes, the module is backward compatible with 2133MHz, 2400MHz and 2666MHz DDR4 speeds, so it will downclock to match the slower modules in the same channel.
Check the BIOS or UEFI memory information screen; it should report ECC enabled and show the module as registered with a 2Rx4 organisation at 2933MHz.
The module has no heat spreader and ships as a single 32GB DDR4 ECC registered DIMM; no cables, brackets or additional components are included.
Także w tym dziale
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Waluta płatności i waluta wyświetlania cen.
Wysyłane z portfela przy kasie
Tylko podgląd — katalog wyceniony jest w dolarach
Brak pasującej waluty.
Wybierz język, w którym wyświetla się strona.
Pierwsza wizyta?
Konto już założone?
Nie ma automatycznego resetowania hasła: ten sklep nie wysyła żadnych e-maili, więc nie ma jednorazowego linku, o który można by poprosić. Adres pozostawiony przy koncie zostanie obsłużony ręcznie.
Zgłoszenie zapisane
Do skrzynki odbiorczej nic nie trafi — ten sklep nie wysyła żadnych e-maili. Zgłoszenia są obsługiwane ręcznie.
Hasło się przypomniało?