We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge contacts

OWC

OWC 32GB DDR4 2933MHz ECC Registered RDIMM 2Rx4 1.2V server RAM

SKU CH-BN37-PZK0E

32 GB DDR4 ECC registered server memory running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 32 GB capacity expands memory headroom for virtualisation
  • 2933 MHz DDR4 speed with CL21 latency accelerates throughput
  • 2 V operation reduces power draw and thermal load

32GB DDR4 ECC RDIMM for servers

This 32GB DDR4 2933MHz module is built for servers, workstations and NAS systems that require ECC registered memory. It uses a 288-pin RDIMM form factor with a 2Rx4 rank configuration and operates at 1.2V. The module is not compatible with standard desktop computers or unbuffered memory.

Capacity and headroom at 2933MHz

The single 32GB stick adds substantial capacity for virtualisation, large databases or memory-intensive workloads. It runs at PC4-23400 with CL21 latency and will down-clock to 2133MHz, 2400MHz or 2666MHz when the platform demands it. Systems needing more than 32GB per slot or higher frequencies than 2933MHz will need different modules.

DDR4 RDIMM interface limits

The DDR4 RDIMM standard tops out at 2933MHz in this configuration, so bandwidth is capped at PC4-23400 speeds. Registered signalling adds a clock cycle of latency compared with unbuffered DIMMs, which is normal for ECC server memory. The 288-pin keying prevents installation in desktop UDIMM slots, and the module cannot be mixed with non-ECC or unbuffered memory.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 32 GB capacity expands memory headroom for virtualisation
  • 2933 MHz DDR4 speed with CL21 latency accelerates throughput
  • 2 V operation reduces power draw and thermal load

Specifications

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo

Questions about this item

Will this 2933MHz DDR4 RDIMM run stably alongside my existing 2133MHz or 2400MHz modules?

Yes, the module is backward compatible with 2133MHz, 2400MHz and 2666MHz DDR4 speeds, so it will downclock to match the slower modules in the same channel.

How can I verify the ECC registered function is active after installing this 2Rx4 32GB stick?

Check the BIOS or UEFI memory information screen; it should report ECC enabled and show the module as registered with a 2Rx4 organisation at 2933MHz.

Does the 288-pin RDIMM come with a heat spreader or any extra accessories in the box?

The module has no heat spreader and ships as a single 32GB DDR4 ECC registered DIMM; no cables, brackets or additional components are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.