SAMSUNG
SAMSUNG 980 M.2 2280 500GB PCIe 3.0 x4 NVMe 1.4 internal SSD MZ-V8V500B/AM
- Internal Solid Stat…
- Consumer
66,99 USD
0.00083839BTC
Dostępny
SAMSUNG
SAMSUNG 980 M.2 2280 1TB internal SSD MZ-V8V1T0B/AM
1TB M.2 2280 NVMe SSD with sequential speeds up to 3500/3000 MB/s and 600TB endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory ComponentsV-NAND MLC
- InterfacePCI-Express 3.0 x4, NVMe 1.4
Options 1TB
- 1TB
- 500GB
- Up to 3500 MB/s sequential read accelerates game loads
- Up to 3000 MB/s sequential write speeds large file saves
- 600 TBW endurance rating supports heavy daily workloads
- AES 256-bit encryption with TCG/Opal 2.0 protects stored data
- Intelligent TurboWrite 2.0 expands SLC buffer up to 5.5 times for sustained speed
Samsung 980 1TB NVMe SSD
The Samsung 980 1TB drive uses a PCI-Express 3.0 x4 interface with NVMe 1.4 protocol. It is built for consumer workloads such as gaming and heavy graphics workflows. The controller is named Pablo and the memory is V-NAND MLC.
Sustained load behaviour
Intelligent TurboWrite 2.0 enlarges the TurboWrite region up to 5.5 times to maintain write speeds. Full Power Mode via Magician 6.3 keeps the drive at peak performance continuously. Host Memory Buffer links host DRAM directly to the controller to overcome DRAMless constraints.
Thermals noise and power
Nickel coating on the controller and a heat spreader label on the NAND provide thermal control. Samsung's thermal algorithm manages heat to minimise performance fluctuations during extended use. Idle power consumption is 45 mW.
Najważniejsze cechy
- Up to 3500 MB/s sequential read accelerates game loads
- Up to 3000 MB/s sequential write speeds large file saves
- 600 TBW endurance rating supports heavy daily workloads
- AES 256-bit encryption with TCG/Opal 2.0 protects stored data
- Intelligent TurboWrite 2.0 expands SLC buffer up to 5.5 times for sustained speed
Specyfikacja
| Brand | SAMSUNG |
|---|---|
| Series | 980 |
| Model | MZ-V8V1T0B/AM |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | V-NAND MLC |
| Interface | PCI-Express 3.0 x4, NVMe 1.4 |
| Protocol | NVMe 1.4 |
| Controller | Pablo |
| Encryption | AES 256-bit Full Disk Encryption, TCG/Opal V2.0, Encrypted Drive (IEEE1667) |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | QD1: 17,000 IOPS QD32: 500,000 IOPS |
| 4KB Random Write | QD1: 54,000 IOPS QD32: 480,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,500,000 hours |
| Features | SOLID PERFORMANCE - Solid performance with Seq. Read/Write speeds up to 3,500/3,000 MB/s - Intelligent TurboWrite 2.0 maximize full potential performance with enlarged TurboWrite region up to 5.5 times - Host Memory Buffer (HMB) links DRAM in the host directly to the 980 to overcome performance restrain from DRAMless - Full Power Mode through Magician 6.3 allows the 980 to run at peak level for nonstop for a consistent high performance PROVEN RELIABILITY - Uncompromising endurance with reliability up to 600TBW - Thermal control solution provides 50% less heat vs. the 970 EVO OPTIMIZE |
| Power Consumption (Idle) | 45 mW |
| Power Consumption (Active) | 4.6W |
| Max Shock Resistance | 1500G & 0.5 ms (Half sine) |
| Height | 2.38mm |
| Width | 22.15mm |
| Depth | 80.15mm |
| Waga przesyłki | 0.07 kg |
| Wymiary opakowania | 142 × 97 × 19 mm |
Inne wersje tego modelu
Jeszcze 1 w tej samej serii
Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.
Pytania dotyczące tego produktu
How much power does the 980 draw when the system is idle for long periods?
Idle power consumption is 45 mW, so the drive adds minimal heat and keeps laptop battery drain low during all-day use.
What motherboard slot and protocol are required for this MZ-V8V1T0B/AM to function?
It needs an M.2 2280 slot wired for PCI-Express 3.0 x4 with NVMe 1.4 support; the drive is DRAM-less and uses Host Memory Buffer, so the platform must provide system RAM for that feature.
Will the 980 work in an older board limited to PCI-Express 3.0 x4?
Yes, the interface is PCI-Express 3.0 x4, so it runs at its rated 3500 MB/s read and 3000 MB/s write on such boards; the Pablo controller and nickel-coated thermal management keep performance steady during sustained loads.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
