Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 80mm square case fan with hydraulic bearing and three-pin connector

SXDOOL

SXDOOL JF0825S1SA-R 80mm case fan 12V 0.26A 3500 RPM 60 CFM 32 dBA hydraulic bearing 3-pin

SKU CH-DSZC-WX1FP MPN JF0825S1SA-R

An 80 mm hydraulic-bearing case fan delivering 60 CFM at 3500 RPM with 32 dBA noise on a 3-pin 12 V connector

  • Fan Size80mm
  • Bearing TypeHydraulic
  • RPM3500-3999 RPM
  • Air Flow60-65 CFM
  • Noise Level30 - 35 dBA
  • Power Connector4 Pin
  • Moves 60 CFM of air for effective case cooling
  • Hydraulic bearing runs at 32 dBA for quiet operation
  • 3500 RPM speed delivers strong airflow performance
  • 12 V 0.26 A design fits standard 3-pin headers
  • 80 mm frame suits compact builds and UPS units

80 mm hydraulic fan for UPS and compact builds

The SXDOOL JF0825S1SA-R is an 80 mm case fan built around a hydraulic bearing for long service life. It runs on 12 V at 0.26 A and connects via a 3-pin power connector. The black non-LED frame suits UPS units such as Castle series C1K C2K C3K and Shante power supplies as well as small-form-factor enclosures.

Thermals noise and power in normal use

At 3500 RPM the fan moves 60 CFM while producing 32 dBA of noise. The specifications allow a speed range up to 3999 RPM with airflow reaching 65 CFM and noise up to 35 dBA. Power draw stays at 0.26 A on the 12 V rail. The hydraulic bearing keeps friction low for consistent acoustic output.

Replaces worn 80 mm UPS fans when original units

This unit is a direct drop-in for a failed JAMICON JF0825S1SA-R in the listed UPS models. The jump is worth it when the original fan develops bearing noise or stops spinning. It is not for builders who need PWM speed control via a 4-pin header or who require higher static pressure for dense radiator stacks.

Najważniejsze cechy

  • Moves 60 CFM of air for effective case cooling
  • Hydraulic bearing runs at 32 dBA for quiet operation
  • 3500 RPM speed delivers strong airflow performance
  • 12 V 0.26 A design fits standard 3-pin headers
  • 80 mm frame suits compact builds and UPS units

Specyfikacja

Fan Size80mm
Bearing TypeHydraulic
RPM3500-3999 RPM
Air Flow60-65 CFM
Noise Level30 - 35 dBA
Power Connector4 Pin
ColorBlack
LEDNon-LED

Pytania dotyczące tego produktu

How do I install the 3-pin connector on this 80 mm fan, and what step do people often miss?

Align the three pins with the motherboard or UPS header, press straight down until the latch clicks, and verify the keyed tab matches the socket notch so the yellow tachometer wire is not shifted one pin over.

What maintenance will the hydraulic bearing need later?

The hydraulic bearing is sealed and requires no lubrication; if noise rises above the rated 32 dBA or speed drops below 3500 RPM, replace the entire fan.

At what point does the 32 dBA noise level become the limiting factor during sustained use?

Under continuous load the fan runs at 3500 RPM producing 32 dBA; if the system demands higher airflow the noise will rise toward 35 dBA before thermal limits are reached.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.