Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black adapter box with SATA IDE connectors USB 3.0 Type-C cable and 12V power supply

WRIARICH

WRIARICH SA28 SATA IDE to USB 3.0 Type-C Adapter with 12V Power

SKU CH-K9FZ-G6GYC

Connects 2.5 or 3.5 inch SATA and IDE drives to USB 3.0 Type-C with included 12V power

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0 Type-C
  • Transfer data at up to 5Gb/s, ten times faster than USB 2.0
  • Works with drives up to 6TB capacity for large storage access
  • Includes 12V power supply for 3.5 inch drive operation
  • Compatible with Windows, Mac OS, Linux and Chrome OS systems

Universal SATA IDE USB 3.0 Adapter

The WRIARICH SA28 connects 2.5in and 3.5in SATA or IDE hard drives, SSDs, and optical drives to a computer through a USB 3.0 Type-C port. A 12V power supply is included for 3.5in devices. It works with Windows, Mac OS, Linux, and Chrome OS. The adapter is designed for data recovery, drive cloning, and accessing legacy storage.

Upgrading from USB 2.0 docks

Moving from a USB 2.0 adapter raises the theoretical transfer ceiling to 5Gb/s, roughly ten times the older rate. The jump is worth it when copying large archives or disk images from mechanical drives that can sustain higher sequential throughput. If the source drive is limited to USB 2.0 speeds, the adapter will not increase its actual performance.

Limited by drive and host bus

Real-world speed depends on the connected drive’s own maximum transfer rate and the host controller’s USB implementation. Mechanical 3.5in drives often saturate well below the 5Gb/s interface limit. The adapter supports drives up to 6TB capacity and is backward compatible with USB 2.0 and 1.1 ports at reduced rates.

Najważniejsze cechy

  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0 Type-C
  • Transfer data at up to 5Gb/s, ten times faster than USB 2.0
  • Works with drives up to 6TB capacity for large storage access
  • Includes 12V power supply for 3.5 inch drive operation
  • Compatible with Windows, Mac OS, Linux and Chrome OS systems

Specyfikacja

BrandWRIARICH
ModelSA28
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Support
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and tro

Pytania dotyczące tego produktu

Does the SA28 adapter need the 12V power supply to run a 3.5in SATA drive?

Yes, the included 12V power adapter must be connected for any 3.5in SATA or IDE drive; 2.5in drives can run from the USB port alone.

What is the correct order to connect the SA28 so the drive is recognised?

Attach the drive to the SATA or IDE connector first, plug in the 12V power if required, switch the adapter on, then connect the USB 3.0 Type-C cable to the computer.

Will the SA28 still work if the 12V power adapter fails later?

The adapter itself remains functional, but any 3.5in drive will not spin up without a replacement 12V 2A supply; 2.5in drives continue to work over USB power.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.