Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Square black 30mm maglev fan with two wires

OEM Industries

OEM Industries KD0503PEV1-8 30mm Maglev fan 5V .9W 2-pin

SKU CH-XM9K-8MH3D

A 30 mm square maglev fan running at 5 V and .9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Compact 30 mm Maglev Fan

The OEM Industries KD0503PEV1-8 is a 30 mm square cooling fan built for tight spaces in small-form-factor PCs or embedded systems. It uses a maglev bearing and a two-pin 5 V connection for simple speed control.

5 V .9 W Power Rating

This fan draws .9 W at 5 V, making it the key figure to match against your board header or controller budget. Exceeding the available current will prevent the fan from spinning up reliably.

Low-Noise Maglev Operation

The maglev bearing reduces friction so the fan runs quietly at typical speeds with minimal vibration. Power draw stays at .9 W under normal load, keeping thermal contribution inside the chassis very low.

Puncte forte

  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Specificații

ModelKD0503PEV1-8
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

Întrebări despre acest articol

How much power does the 5 V 0.9 W rating actually draw from a motherboard header?

The fan is rated at 0.9 W on a 5 V supply, so it draws very little current from a standard 5 V fan header.

What does the 2‑pin connector mean for speed control on this 30 mm maglev fan?

A 2‑pin connector provides power only; speed is fixed at the voltage supplied and cannot be PWM‑controlled by the board.

Will the 30 mm square frame with 6 mm thickness fit in the tight clearance above a low‑profile CPU cooler?

The fan measures 30 mm square and 6 mm thick, so it fits in very narrow spaces where larger fans cannot.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.