Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

OEM Industries

OEM Industries KD0503PEV1-8 30mm Maglev fan 5V .9W 2-pin

SKU CH-XM9K-8MH3D

A 30 mm square maglev fan running at 5 V and .9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Compact 30 mm Maglev Fan

The OEM Industries KD0503PEV1-8 is a 30 mm square cooling fan built for tight spaces in small-form-factor PCs or embedded systems. It uses a maglev bearing and a two-pin 5 V connection for simple speed control.

5 V .9 W Power Rating

This fan draws .9 W at 5 V, making it the key figure to match against your board header or controller budget. Exceeding the available current will prevent the fan from spinning up reliably.

Low-Noise Maglev Operation

The maglev bearing reduces friction so the fan runs quietly at typical speeds with minimal vibration. Power draw stays at .9 W under normal load, keeping thermal contribution inside the chassis very low.

Přednosti

  • Maglev bearing reduces friction for quieter operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 5 V .9 W draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • No LED lighting avoids unwanted case glow

Specifikace

ModelKD0503PEV1-8
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

Otázky k tomuto produktu

How much power does the 5 V 0.9 W rating actually draw from a motherboard header?

The fan is rated at 0.9 W on a 5 V supply, so it draws very little current from a standard 5 V fan header.

What does the 2‑pin connector mean for speed control on this 30 mm maglev fan?

A 2‑pin connector provides power only; speed is fixed at the voltage supplied and cannot be PWM‑controlled by the board.

Will the 30 mm square frame with 6 mm thickness fit in the tight clearance above a low‑profile CPU cooler?

The fan measures 30 mm square and 6 mm thick, so it fits in very narrow spaces where larger fans cannot.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.