NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
32 GB DDR4 2400 ECC LRDIMM 2Rx4 server memory with 1.2 V operation and CL17 latency
This module delivers 32GB of DDR4 memory at 2400MHz with ECC and load-reduced buffering. It targets administrators upgrading compatible server or workstation platforms that require registered memory. The 2Rx4 organisation and 1.20V operation match the Samsung M386A4K40BB0-CRC and M386A4K40BB0-CRC5 part numbers. Builders needing unbuffered or non-ECC DIMMs should select a different product.
The load-reduced architecture reduces electrical loading on the memory bus, helping maintain signal integrity when all slots are populated. ECC detects and corrects single-bit errors during continuous operation. CL17 latency at PC4-19200 provides consistent throughput for virtualisation, database and compute workloads that run for extended periods. Systems not qualified for LRDIMM will not benefit from this module.
This 32GB stick replaces lower-capacity DDR4 LRDIMMs or non-ECC DIMMs in qualified platforms, doubling density per slot. The jump is worthwhile when the motherboard supports LRDIMM and the workload demands ECC protection at higher memory density. Buyers whose systems only accept standard RDIMM or UDIMM cannot use this module and must choose the correct form factor.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at the standard DDR4 voltage of 1.20 V, so power draw and heat output stay within the normal range for registered server DIMMs at this speed.
You need a server or workstation board with DDR4 288-pin DIMM slots that explicitly support Load Reduced ECC memory; consumer desktop chipsets will not work.
Mixing Load Reduced and standard Registered DIMMs is not supported; all slots must use the same memory architecture for the system to boot and run stably.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?