SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Toshiba
512 GB M.2 2280 PCI Express 3.1 x4 SSD with 96-layer 3D TLC flash and SLC cache reaching 3180 MB/s read and 2960 MB/s write
The Toshiba XG6 KXG60ZNV512G is a 512 GB solid-state drive built on 96-layer 3D TLC BiCS FLASH with an SLC cache. It uses a single-sided M.2 2280 form factor and connects through a PCI Express 3.1 x4 interface. Sequential speeds reach up to 3180 MB/s read and 2960 MB/s write, with random performance up to 355000 read and 365000 write IOPS. Active power consumption stays at 4.7 W or less.
The drive targets power-sensitive laptops, performance-oriented desktops and data-centre roles such as server boot, caching and logging. Buyers who need capacities beyond 1024 GB or a self-encrypting model with TCG Opal 2.01 should evaluate other options. The single-sided layout fits space-constrained boards, but systems limited to PCIe 2.0 will not realise the rated throughput.
The PCI Express 3.1 x4 link is the single specification that determines whether this drive works at its rated speed. A motherboard or laptop must provide an M.2 slot wired for PCIe 3.1 x4; slots limited to PCIe 2.0 or x2 lanes will cap sequential and random performance. No other interface or protocol is supported by this model.
| Brand | TOSHIBA |
|---|---|
| NAND Flash Memory Type | SLC |
The XG6 series uses 96-layer BiCS FLASH 3D TLC with SLC cache, a design that spreads writes across the whole array so the flash typically outlasts the controller in normal workloads.
Sequential write tops out at 2960 MB/s, so the PCIe 3.1 x4 interface saturates before the NAND reaches its internal throughput ceiling.
Active power stays at 4.7 W or less and standby drops below 3 mW, so the single-sided M.2 2280 module generates minimal heat even under continuous load.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?