Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board adapter with M.2 slot and SATA connectors

EN-Labs

EN-Labs SATA3TONGFFAD M.2 SATA to SATA Adapter 2230/2242/2260/2280 B-key B+M-key

SKU CH-88RY-NX9GP

Converts SATA-bus M.2 NGFF SSDs (2230, 2242, 2260, 2280, B-key or B+M-key) to a standard 6.0 Gbps SATA connection

  • FeaturesConvert an M. 2 NGFF SSD into SATA (6Gbps) interface M. 2 NG
  • Convert M.2 SATA SSD to 6.0 Gbps SATA interface
  • Supports B-key and B+M-key M.2 SATA SSDs
  • Compatible with 2230, 2242, 2260, 2280 form factors
  • Works with SATA revision I, II, III speeds
  • Does not support NVMe or PCIe M-key SSDs

What this adapter does

The EN-Labs SATA3TONGFFAD converts a SATA-bus M.2 NGFF SSD into a standard SATA 6 Gbps connection. It accepts B-key and B+M-key modules in 2230, 2242, 2260 and 2280 lengths. The board supports SATA revision I, II and III at 1.5, 3.0 and 6.0 Gbps.

Who it suits and who it does not

Builders with a spare 2.5-inch SATA bay or port who want to reuse a SATA-bus M.2 drive will find it a direct fit. It cannot drive PCIe-based M-key or M+B-key NVMe SSDs such as the Samsung 950 PRO or 960 EVO, so buyers needing NVMe support must choose a different adapter.

Capacity headroom and limits

The adapter passes through whatever capacity the installed SATA M.2 SSD provides, with no added overhead. Performance tops out at the SATA III 6.0 Gbps link, so very high sequential workloads will saturate the bus while random I/O remains within the drive's own limits.

I korthet

  • Convert M.2 SATA SSD to 6.0 Gbps SATA interface
  • Supports B-key and B+M-key M.2 SATA SSDs
  • Compatible with 2230, 2242, 2260, 2280 form factors
  • Works with SATA revision I, II, III speeds
  • Does not support NVMe or PCIe M-key SSDs

Specifikationer

BrandEN-Labs
ModelSATA3TONGFFAD
FeaturesConvert an M. 2 NGFF SSD into SATA (6Gbps) interface M. 2 NGFF SSD to SATA Adapter Converter supports SATA-Bus B key and B+M Key M. 2 SSDs Maximize system speed by adding M. 2 SSD performance Reduce overall power consumption, with a high efficiency M. 2 SSD Support for SATA revision I/II/III ( 1.5 / 3.0 / 6.0 Gbps) Supports full length M. 2 NGFF (Next Generation Form Factor) SSD Solid State Drives (2230, 2242, 2260, 2280)

Frågor om den här produkten

Which M.2 SATA SSD sizes does the EN-Labs SATA3TONGFFAD adapter accept?

The adapter fits 2230, 2242, 2260 and 2280 mm M.2 SATA SSDs with B-key or B+M-key connectors.

Will the adapter work if I keep my existing SATA II host controller?

Yes, it supports SATA revision I, II and III at 1.5, 3.0 and 6.0 Gbps, so it negotiates down to your controller speed.

How can I confirm the EN-Labs SATA3TONGFFAD is operating at the full 6.0 Gbps link rate after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6.0 Gbps when the host and SSD both support SATA III.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.