Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green circuit board adapter with M.2 slot and SATA connectors

EN-Labs

EN-Labs SATA3TONGFFAD M.2 SATA to SATA Adapter 2230/2242/2260/2280 B-key B+M-key

SKU CH-88RY-NX9GP

Converts SATA-bus M.2 NGFF SSDs (2230, 2242, 2260, 2280, B-key or B+M-key) to a standard 6.0 Gbps SATA connection

  • FeaturesConvert an M. 2 NGFF SSD into SATA (6Gbps) interface M. 2 NG
  • Convert M.2 SATA SSD to 6.0 Gbps SATA interface
  • Supports B-key and B+M-key M.2 SATA SSDs
  • Compatible with 2230, 2242, 2260, 2280 form factors
  • Works with SATA revision I, II, III speeds
  • Does not support NVMe or PCIe M-key SSDs

What this adapter does

The EN-Labs SATA3TONGFFAD converts a SATA-bus M.2 NGFF SSD into a standard SATA 6 Gbps connection. It accepts B-key and B+M-key modules in 2230, 2242, 2260 and 2280 lengths. The board supports SATA revision I, II and III at 1.5, 3.0 and 6.0 Gbps.

Who it suits and who it does not

Builders with a spare 2.5-inch SATA bay or port who want to reuse a SATA-bus M.2 drive will find it a direct fit. It cannot drive PCIe-based M-key or M+B-key NVMe SSDs such as the Samsung 950 PRO or 960 EVO, so buyers needing NVMe support must choose a different adapter.

Capacity headroom and limits

The adapter passes through whatever capacity the installed SATA M.2 SSD provides, with no added overhead. Performance tops out at the SATA III 6.0 Gbps link, so very high sequential workloads will saturate the bus while random I/O remains within the drive's own limits.

Pontos fortes

  • Convert M.2 SATA SSD to 6.0 Gbps SATA interface
  • Supports B-key and B+M-key M.2 SATA SSDs
  • Compatible with 2230, 2242, 2260, 2280 form factors
  • Works with SATA revision I, II, III speeds
  • Does not support NVMe or PCIe M-key SSDs

Especificações

BrandEN-Labs
ModelSATA3TONGFFAD
FeaturesConvert an M. 2 NGFF SSD into SATA (6Gbps) interface M. 2 NGFF SSD to SATA Adapter Converter supports SATA-Bus B key and B+M Key M. 2 SSDs Maximize system speed by adding M. 2 SSD performance Reduce overall power consumption, with a high efficiency M. 2 SSD Support for SATA revision I/II/III ( 1.5 / 3.0 / 6.0 Gbps) Supports full length M. 2 NGFF (Next Generation Form Factor) SSD Solid State Drives (2230, 2242, 2260, 2280)

Perguntas sobre este artigo

Which M.2 SATA SSD sizes does the EN-Labs SATA3TONGFFAD adapter accept?

The adapter fits 2230, 2242, 2260 and 2280 mm M.2 SATA SSDs with B-key or B+M-key connectors.

Will the adapter work if I keep my existing SATA II host controller?

Yes, it supports SATA revision I, II and III at 1.5, 3.0 and 6.0 Gbps, so it negotiates down to your controller speed.

How can I confirm the EN-Labs SATA3TONGFFAD is operating at the full 6.0 Gbps link rate after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6.0 Gbps when the host and SSD both support SATA III.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.