저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board adapter with M.2 slot and SATA connectors

EN-Labs

EN-Labs SATA3TONGFFAD M.2 SATA to SATA Adapter 2230/2242/2260/2280 B-key B+M-key

SKU CH-88RY-NX9GP

Converts SATA-bus M.2 NGFF SSDs (2230, 2242, 2260, 2280, B-key or B+M-key) to a standard 6.0 Gbps SATA connection

  • FeaturesConvert an M. 2 NGFF SSD into SATA (6Gbps) interface M. 2 NG
  • Convert M.2 SATA SSD to 6.0 Gbps SATA interface
  • Supports B-key and B+M-key M.2 SATA SSDs
  • Compatible with 2230, 2242, 2260, 2280 form factors
  • Works with SATA revision I, II, III speeds
  • Does not support NVMe or PCIe M-key SSDs

What this adapter does

The EN-Labs SATA3TONGFFAD converts a SATA-bus M.2 NGFF SSD into a standard SATA 6 Gbps connection. It accepts B-key and B+M-key modules in 2230, 2242, 2260 and 2280 lengths. The board supports SATA revision I, II and III at 1.5, 3.0 and 6.0 Gbps.

Who it suits and who it does not

Builders with a spare 2.5-inch SATA bay or port who want to reuse a SATA-bus M.2 drive will find it a direct fit. It cannot drive PCIe-based M-key or M+B-key NVMe SSDs such as the Samsung 950 PRO or 960 EVO, so buyers needing NVMe support must choose a different adapter.

Capacity headroom and limits

The adapter passes through whatever capacity the installed SATA M.2 SSD provides, with no added overhead. Performance tops out at the SATA III 6.0 Gbps link, so very high sequential workloads will saturate the bus while random I/O remains within the drive's own limits.

주요 특징

  • Convert M.2 SATA SSD to 6.0 Gbps SATA interface
  • Supports B-key and B+M-key M.2 SATA SSDs
  • Compatible with 2230, 2242, 2260, 2280 form factors
  • Works with SATA revision I, II, III speeds
  • Does not support NVMe or PCIe M-key SSDs

사양

BrandEN-Labs
ModelSATA3TONGFFAD
FeaturesConvert an M. 2 NGFF SSD into SATA (6Gbps) interface M. 2 NGFF SSD to SATA Adapter Converter supports SATA-Bus B key and B+M Key M. 2 SSDs Maximize system speed by adding M. 2 SSD performance Reduce overall power consumption, with a high efficiency M. 2 SSD Support for SATA revision I/II/III ( 1.5 / 3.0 / 6.0 Gbps) Supports full length M. 2 NGFF (Next Generation Form Factor) SSD Solid State Drives (2230, 2242, 2260, 2280)

이 상품에 대한 질문

Which M.2 SATA SSD sizes does the EN-Labs SATA3TONGFFAD adapter accept?

The adapter fits 2230, 2242, 2260 and 2280 mm M.2 SATA SSDs with B-key or B+M-key connectors.

Will the adapter work if I keep my existing SATA II host controller?

Yes, it supports SATA revision I, II and III at 1.5, 3.0 and 6.0 Gbps, so it negotiates down to your controller speed.

How can I confirm the EN-Labs SATA3TONGFFAD is operating at the full 6.0 Gbps link rate after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6.0 Gbps when the host and SSD both support SATA III.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.