A-Tech 128GB DDR4 2933 ECC LRDIMM 4Rx4 server RAM
- 128GB
- 288-Pin DDR4 SDRAM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
256 GB dual-channel DDR4-2666 ECC LRDIMM kit with two 128 GB octal-rank modules at CL19 and 1.2 V
Capacity 256GB (2 x 128GB)
This A-Tech kit supplies 256 GB of DDR4 server memory as two 128 GB LRDIMM modules. It is built for DDR4-compatible servers and workstations that require ECC load-reduced DIMMs and will not work in desktop or laptop systems.
The modules run at 2666 MHz with CL19 latency and 1.20 V, using 3DS/TSV octal-rank organisation to keep electrical loading low on the memory bus. ECC and load-reduced buffering maintain data integrity and signal stability during extended, high-capacity workloads.
Verify that your platform supports DDR4 288-pin LRDIMMs at 2666 MHz and accepts 2S4Rx4 (8Rx4) rank configurations. Consult the system manual for correct slot population rules and maximum supported capacity per channel before ordering.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 256GB (2x128GB) 2S4Rx4 PC4-2666V-L |
| Part Number | NE-SS-0709 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4 3DS/TSV) |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Each module operates at the standard DDR4 voltage of 1.2V; exact power draw depends on the server platform and workload intensity.
This kit requires a DDR4 server or workstation motherboard with 288-pin DIMM slots that explicitly support Load Reduced ECC memory at 2666 MHz.
Mixing LRDIMMs with standard RDIMMs is not supported; all populated slots must use the same Load Reduced ECC module type for stable operation.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม