A-Tech 128GB DDR4 2933 ECC RDIMM 2S2Rx4 3DS Server RAM
- 128GB
- DDR4 2933 (PC4 2340…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
A 128 GB DDR4 3200 ECC load-reduced DIMM for expanding server or workstation memory capacity
Capacity 128GB
This 128 GB A-Tech module runs at DDR4 3200 with ECC and Load Reduced signalling. It uses a 288-pin DIMM form factor, operates at 1.20 V, and carries a CL22 latency rating. The quad-rank 4Rx4 organisation is built for high-density server and workstation platforms.
It fits systems that explicitly support DDR4 Load Reduced DIMMs with 4Rx4 ranking. Desktop and laptop boards cannot accept this module, and standard registered DIMM slots will not work with the LRDIMM protocol. Buyers who need non-ECC memory or a different rank configuration must choose another part.
Only motherboards qualified for DDR4 4Rx4 LRDIMM modules can use this stick. Verify the platform’s memory qualification list before ordering; an incompatible slot will not post with this module installed.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 128GB 4Rx4 PC4-3200AA-L |
| Part Number | NE-SS-0716 |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 / 4DRx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 when installed in a server that supports that speed.
It requires a 288-pin DDR4 DIMM socket; the module has no heat spreader, so standard server DIMM clearance applies.
Power down the server, open the chassis, align the notch on the 288-pin edge connector, press firmly until both retention clips lock, then consult the system manual for correct channel population order for quad-rank modules.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม