A-Tech 128GB DDR4 2933 ECC RDIMM 2S2Rx4 3DS Server RAM
- 128GB
- DDR4 2933 (PC4 2340…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 128 GB DDR4 3200 ECC load-reduced DIMM for expanding server or workstation memory capacity
Capacity 128GB
This 128 GB A-Tech module runs at DDR4 3200 with ECC and Load Reduced signalling. It uses a 288-pin DIMM form factor, operates at 1.20 V, and carries a CL22 latency rating. The quad-rank 4Rx4 organisation is built for high-density server and workstation platforms.
It fits systems that explicitly support DDR4 Load Reduced DIMMs with 4Rx4 ranking. Desktop and laptop boards cannot accept this module, and standard registered DIMM slots will not work with the LRDIMM protocol. Buyers who need non-ECC memory or a different rank configuration must choose another part.
Only motherboards qualified for DDR4 4Rx4 LRDIMM modules can use this stick. Verify the platform’s memory qualification list before ordering; an incompatible slot will not post with this module installed.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 128GB 4Rx4 PC4-3200AA-L |
| Part Number | NE-SS-0716 |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 / 4DRx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 when installed in a server that supports that speed.
It requires a 288-pin DDR4 DIMM socket; the module has no heat spreader, so standard server DIMM clearance applies.
Power down the server, open the chassis, align the notch on the 288-pin edge connector, press firmly until both retention clips lock, then consult the system manual for correct channel population order for quad-rank modules.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟