EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
32 GB DDR4 2933 ECC unbuffered DIMM with 2Rx8 organisation and CL21 latency
This A-Tech module delivers 32GB of DDR4 2933 (PC4-23400) ECC unbuffered memory in a single 288-pin DIMM. It targets server and workstation operators who need error-correcting capacity without registered buffering. The CL21 latency and 1.20V operation match standard DDR4 specifications for compatible platforms.
Built with major-brand chipset components in a 2Rx8 configuration, the stick fits standard DDR4 DIMM slots on boards that accept ECC UDIMM modules. Unbuffered design keeps electrical loading low for consumer-derived server boards, while the 288-pin interface ensures physical compatibility with DDR4-only sockets.
This unit serves as a direct equivalent for the Samsung M391A4G43AB1-CVF part number, letting administrators expand or refresh memory in qualified systems. The jump is worthwhile when workloads demand ECC integrity at 2933 MT/s and the platform supports unbuffered DDR4 DIMMs rather than registered or load-reduced variants.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module is rated for DDR4 2933 MT/s (PC4-23400). It will operate at that speed if the platform supports it; otherwise it downclocks to the highest speed the memory controller allows.
It fits a standard DDR4 288-pin DIMM slot. As an unbuffered ECC UDIMM it has the same height and keying as regular DDR4 DIMMs, so no extra clearance is required beyond the slot itself.
Power off, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click. The step often missed is confirming the system BIOS recognises the full 32 GB capacity and ECC function after boot.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
No language matches that.
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม