A-Tech 8GB DDR3 1333MHz SODIMM PC3-10600 CL9 1.5V Laptop RAM
- 8GB
- 204-Pin DDR3 SO-DIMM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
An 8 GB DDR4 2666 MHz registered ECC module with CL19 latency for servers and workstations
Capacity 8GB
This 8 GB DDR4 2666 registered DIMM adds ECC-protected capacity to compatible servers and workstations. The 288-pin module operates at 1.20 V with CL19 latency and a single-rank 1Rx4 layout. It is built for systems that require registered memory and will not function in standard desktop or laptop platforms.
Swapping out lower-speed DDR4 RDIMMs or filling empty slots raises throughput to PC4-21300 levels. The jump is worthwhile when workloads are memory-bound and the platform supports 2666 MT/s registered operation. Systems limited to slower DDR4 speeds or unbuffered memory cannot use this module.
The 8 GB module handles virtualization hosts, database buffers and multi-user workloads that benefit from ECC integrity. Headroom ends when aggregate demand exceeds the installed DIMM count or when the platform caps memory below the required total. Additional modules are needed for larger datasets.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 8GB 1Rx4 PC4-2666V-R |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
This module uses the standard 288-pin DDR4 DIMM form factor and requires a server or workstation motherboard with registered ECC DDR4 slots. It is not compatible with desktop or laptop systems.
The module must be seated firmly until the retention clips click on both ends, and the system BIOS must support registered ECC memory; otherwise the server will not POST or will report a memory error.
No firmware updates are required for the memory itself. The module is tested for lifetime reliability; replacement is only needed if a hardware fault occurs or if you expand capacity beyond the current 8 GB.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม