biteo
biteo BT2000W 2000 W power supply
A 2000 W ATX power supply with active PFC, 16 PCIe 6+2-pin connectors and 8 SATA connectors supports up to 8 GPUs for mining or server use
- ColorBlack
- TypeATX
- Maximum Power2000 W
- PFCActive
- Main Connector20+4Pin
- +12V RailsSingle
- Delivers 2000 W peak power for multi-GPU mining rigs
- Active PFC accepts 100-240 V input with 80-90 % conversion efficiency
- Sixteen 6+2-pin PCIe connectors support up to eight graphics cards
- Single +12 V rail design provides stable output under heavy load
- Over-voltage, overload and high-temperature protections safeguard components
2000 W mining power supply
The biteo BT2000W delivers a peak output of 2000 W on a single +12 V rail and is built for mining rigs or servers that run up to eight graphics cards. It accepts 100-240 V input through an active PFC circuit that reaches 80-90 % conversion efficiency. The unit carries 80 Plus series branding and includes full protection against over-voltage, overload, short circuit and high temperature.
Installation notes
The power supply uses a fixed cable set with a 20+4 pin ATX connector, one 4+4 pin CPU connector, sixteen 6+2 pin PCIe connectors, eight SATA connectors and five IDE connectors. Because it is non-modular, all cables must be routed even if unused, so plan cable management space in a 165 mm deep chassis. A common issue is forgetting to seat the 20+4 pin motherboard connector first; the unit will not start without that link.
Pre-order checklist
Verify that your case can accommodate a 165 mm long ATX unit and that airflow can reach the large cooling fan. Confirm the mains supply in your region falls within the 100-240 V range and that a suitable IEC power cord is available, as one is not included. Ensure the motherboard and each graphics card match the provided 20+4 pin, 4+4 pin and 6+2 pin interfaces.
จุดเด่น
- Delivers 2000 W peak power for multi-GPU mining rigs
- Active PFC accepts 100-240 V input with 80-90 % conversion efficiency
- Sixteen 6+2-pin PCIe connectors support up to eight graphics cards
- Single +12 V rail design provides stable output under heavy load
- Over-voltage, overload and high-temperature protections safeguard components
ข้อมูลจำเพาะ
| Brand | biteo |
|---|---|
| Series | 80 Plus |
| Color | Black |
| Type | ATX |
| Maximum Power | 2000 W |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| PCI-Express Connector | 16 x 6+2-Pin |
| SATA Power Connector | 8 |
| SLI | Certified |
| CrossFire | Certified |
| Max PSU Length | 165 mm |
| Modular | No |
| Efficiency | > 85% |
| Energy-Efficient | WEEE |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Connectors | 1 x 24 pin (20+4) ATX |
| Features | Independent 5V/12V/3.3V feedback |
คำถามเกี่ยวกับสินค้านี้
How can I confirm the BT2000W is running correctly after I connect it?
The unit powers on when the 20+4 pin ATX connector is attached to the motherboard and a mains cable is plugged in; the large fan will spin and the single +12 V rail delivers stable voltage to all connected components.
What comes in the box and which cables must I source myself?
The package includes the power supply only; a mains power cable is not included and must be purchased separately.
Which capacity should I choose for a mining rig with eight GPUs?
The BT2000W is rated at 2000 W peak and 1800 W continuous, providing sixteen 6+2 pin PCIe connectors to support up to eight graphics cards.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



