เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Micron

Micron 7450 PRO MTFDKCC15T3TFR-1BC1ZABYYR 15.36 TB enterprise SSD

SKU CH-1H1X-VDCE9 MPN MTFDKCC15T3TFR-1BC1ZABYYR

15.36 TB enterprise NVMe SSD with U.3 interface, PCIe 4.0 x4 speed and 6800 MB/s reads

  • Device TypeInternal / External Solid State Drive (SSD)
  • 36 TB capacity supports massive datasets
  • PCIe 4.0 x4 NVMe delivers 6800 MB/s reads
  • U.3 2.5" form factor fits standard server bays
  • 28000 TBW endurance handles heavy write workloads
  • 2 million hour MTBF ensures enterprise reliability

15.36 TB enterprise NVMe SSD

The Micron 7450 PRO delivers 15.36 TB of storage in a 2.5-inch U.3 form factor. It connects through a PCIe 4.0 x4 interface using NVMe 1.4 protocol. The drive is built for storage systems and servers that require high-capacity solid-state storage.

Sustained write endurance

Rated at 28000 TB of total bytes written, the SSD is engineered for continuous enterprise workloads rather than burst transfers. A mean time between failures of 2 million device hours supports long-term deployment in always-on environments. The 1.2 V I/O voltage helps maintain stable operation under heavy sustained I/O.

6800 MB/s sequential read ceiling

The maximum read transfer rate of 6800 MB/s sets the performance boundary for read-intensive applications. Workloads demanding higher throughput will need additional drives or a faster interface. This figure determines whether the drive matches the throughput requirements of the target server platform.

จุดเด่น

  • 36 TB capacity supports massive datasets
  • PCIe 4.0 x4 NVMe delivers 6800 MB/s reads
  • U.3 2.5" form factor fits standard server bays
  • 28000 TBW endurance handles heavy write workloads
  • 2 million hour MTBF ensures enterprise reliability

ข้อมูลจำเพาะ

BrandMicron
Device TypeInternal / External Solid State Drive (SSD)
น้ำหนักในการจัดส่ง0.45 kg
ขนาดบรรจุภัณฑ์25 × 25 × 25 mm

คำถามเกี่ยวกับสินค้านี้

How much power does the 1.2-volt I/O draw when the 7450 PRO runs continuously in a storage server?

The drive operates at a 1.2-volt I/O voltage, and its NVMe 1.4 interface supports power-state transitions that reduce consumption during idle periods while delivering up to 6800 MB/s under sustained load.

Which server backplane and cabling are required to install this U.3 2.5-inch 15mm SSD?

A U.3-compatible 2.5-inch bay with PCIe 4.0 x4 wiring is needed; the drive plugs directly into the backplane without an adapter and draws power through the same connector.

Will this PCIe 4.0 x4 NVMe drive work in a chassis that only provides PCIe 3.0 x4 slots?

Yes, the NVMe 1.4 interface is backward compatible and will negotiate a PCIe 3.0 x4 link, delivering reduced throughput while retaining the full 15.36 TB capacity and 28000 TB endurance rating.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที