myVolts
myVolts LPV-150-12 150W DC12V IP67 power supply
IP67-rated 150W DC12V switching supply with aluminium housing, 12.5A output and automatic overload, overvoltage and overtemperature protection
- TypeAT
- IP67 rating protects against dust and water for outdoor installation
- 150 W at 12 V delivers up to 12.5 A for LED strips and industrial gear
- 81 % efficiency reduces heat and lowers running cost
- Aluminium alloy housing dissipates heat for stable operation from -10 °C to 60 °C
- Hiccup-mode protection auto-recovers after short-circuit, overload or over-voltage events
Outdoor-ready 150 W 12 V supply
The myVolts LPV-150-12 is a switching power supply rated at 150 W with a DC 12 V output. Its IP67-rated aluminium-alloy case makes it suitable for outdoor LED lighting, industrial control and similar installations that must withstand moisture and dust.
12.5 A continuous headroom
The unit delivers 0–12.5 A at 12 V, giving 150 W of usable power for LED strips, bulbs or instrumentation. Overload protection engages between 115 % and 135 % of rated output and cuts power automatically; once the fault is removed the supply recovers without manual intervention.
Fanless IP67 thermal design
With no moving parts the supply relies on its aluminium housing to dissipate heat across a working range of -10 °C to +60 °C at 20–90 % RH. Efficiency is 81 %, so waste heat stays modest, and the sealed IP67 enclosure keeps noise at zero while maintaining protection against water ingress.
จุดเด่น
- IP67 rating protects against dust and water for outdoor installation
- 150 W at 12 V delivers up to 12.5 A for LED strips and industrial gear
- 81 % efficiency reduces heat and lowers running cost
- Aluminium alloy housing dissipates heat for stable operation from -10 °C to 60 °C
- Hiccup-mode protection auto-recovers after short-circuit, overload or over-voltage events
ข้อมูลจำเพาะ
| Type | AT |
|---|
คำถามเกี่ยวกับสินค้านี้
Will the LPV-150-12 fit alongside older LED strips that run on 12 V and draw up to 12.5 A?
Yes — the unit delivers DC12V at 0-12.5 A, so existing 12 V strips within that current range will operate normally.
How can I confirm the LPV-150-12 is working correctly once installed?
Measure the output with a multimeter; a steady 12 V reading under load and the LED indicator lit show the supply is operating within its 81 % efficiency spec.
What comes in the box with the LPV-150-12 and what must I source separately?
The package contains the IP67-rated aluminium-alloy supply (245 x 70 x 48 mm); you must provide AC input wiring for 180-264 V and the DC output cables for your LED load.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



