NEMIX RAM
NEMIX RAM CSE-735D4-668B 32GB (2x16GB) DDR4 3200 ECC UDIMM memory upgrade
32 GB kit of two 16 GB DDR4 3200 ECC UDIMM modules at 1.2 V CL22 for Supermicro SYS-530A-IL and X12SAE-5 systems
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in critical workloads
- 32GB dual-channel kit expands SuperMicro SYS-530A-IL memory capacity
- DDR4 3200 speed matches motherboard specifications for stable operation
- 2V low voltage reduces system power consumption
- 288-pin UDIMM design enables straightforward user installation
System-Specific 32GB DDR4 ECC Kit
This 32GB kit contains two 16GB DDR4 3200 modules built for the SuperMicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboard. ECC unbuffered operation protects data integrity in professional workloads. The 288-pin UDIMM form factor matches the validated platform slots. IT buyers seeking verified compatibility for this specific system receive a matched pair.
1.20V CL22 Unbuffered Modules
Each module runs at 1.20V with CL22 latency and 1Rx8 organisation using major OEM chips from Samsung, Micron or Hynix. No heat spreader is fitted, so clearance inside dense chassis remains unrestricted. The unbuffered design connects directly to the memory controller without a register. Builders who need registered DIMMs or lower latency timings cannot use this kit.
Matched Pair for Dual-Channel Operation
The package supplies two 16GB sticks pre-tested as a kit to enable dual-channel bandwidth on the target SuperMicro platform. NEMIX RAM stress-tests every module under load before shipment. Users who require a single 32GB module or a four-stick population must source a different configuration.
จุดเด่น
- ECC protection prevents data corruption in critical workloads
- 32GB dual-channel kit expands SuperMicro SYS-530A-IL memory capacity
- DDR4 3200 speed matches motherboard specifications for stable operation
- 2V low voltage reduces system power consumption
- 288-pin UDIMM design enables straightforward user installation
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM |
| Part Number | ME25600-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
What speed and data rate does this DDR4 3200 kit run at?
The kit runs at DDR4 3200 with a PC4-25600 rating, providing ECC error correction at 1.20 V.
Will these 288-pin UDIMMs fit the SuperMicro SYS-530A-IL workstation?
Yes, the 2 x 16 GB modules are 288-pin unbuffered UDIMMs validated for the SYS-530A-IL and X12SAE-5 platforms.
How do I install the two modules, and what step is often missed?
Power down, open the chassis, align each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16 GB sticks are detected.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



