We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM sticks, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM CSE-735D4-668B 32GB (2x16GB) DDR4 3200 ECC UDIMM memory upgrade

SKU CH-0J3Z-F58CK MPN CSE-735D4-668B

32 GB kit of two 16 GB DDR4 3200 ECC UDIMM modules at 1.2 V CL22 for Supermicro SYS-530A-IL and X12SAE-5 systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 32GB dual-channel kit expands SuperMicro SYS-530A-IL memory capacity
  • DDR4 3200 speed matches motherboard specifications for stable operation
  • 2V low voltage reduces system power consumption
  • 288-pin UDIMM design enables straightforward user installation

System-Specific 32GB DDR4 ECC Kit

This 32GB kit contains two 16GB DDR4 3200 modules built for the SuperMicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboard. ECC unbuffered operation protects data integrity in professional workloads. The 288-pin UDIMM form factor matches the validated platform slots. IT buyers seeking verified compatibility for this specific system receive a matched pair.

1.20V CL22 Unbuffered Modules

Each module runs at 1.20V with CL22 latency and 1Rx8 organisation using major OEM chips from Samsung, Micron or Hynix. No heat spreader is fitted, so clearance inside dense chassis remains unrestricted. The unbuffered design connects directly to the memory controller without a register. Builders who need registered DIMMs or lower latency timings cannot use this kit.

Matched Pair for Dual-Channel Operation

The package supplies two 16GB sticks pre-tested as a kit to enable dual-channel bandwidth on the target SuperMicro platform. NEMIX RAM stress-tests every module under load before shipment. Users who require a single 32GB module or a four-stick population must source a different configuration.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • 32GB dual-channel kit expands SuperMicro SYS-530A-IL memory capacity
  • DDR4 3200 speed matches motherboard specifications for stable operation
  • 2V low voltage reduces system power consumption
  • 288-pin UDIMM design enables straightforward user installation

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

What speed and data rate does this DDR4 3200 kit run at?

The kit runs at DDR4 3200 with a PC4-25600 rating, providing ECC error correction at 1.20 V.

Will these 288-pin UDIMMs fit the SuperMicro SYS-530A-IL workstation?

Yes, the 2 x 16 GB modules are 288-pin unbuffered UDIMMs validated for the SYS-530A-IL and X12SAE-5 platforms.

How do I install the two modules, and what step is often missed?

Power down, open the chassis, align each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16 GB sticks are detected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.