我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM CSE-735D4-668B 32GB (2x16GB) DDR4 3200 ECC UDIMM memory upgrade

SKU CH-0J3Z-F58CK MPN CSE-735D4-668B

32 GB kit of two 16 GB DDR4 3200 ECC UDIMM modules at 1.2 V CL22 for Supermicro SYS-530A-IL and X12SAE-5 systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 32GB dual-channel kit expands SuperMicro SYS-530A-IL memory capacity
  • DDR4 3200 speed matches motherboard specifications for stable operation
  • 2V low voltage reduces system power consumption
  • 288-pin UDIMM design enables straightforward user installation

System-Specific 32GB DDR4 ECC Kit

This 32GB kit contains two 16GB DDR4 3200 modules built for the SuperMicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboard. ECC unbuffered operation protects data integrity in professional workloads. The 288-pin UDIMM form factor matches the validated platform slots. IT buyers seeking verified compatibility for this specific system receive a matched pair.

1.20V CL22 Unbuffered Modules

Each module runs at 1.20V with CL22 latency and 1Rx8 organisation using major OEM chips from Samsung, Micron or Hynix. No heat spreader is fitted, so clearance inside dense chassis remains unrestricted. The unbuffered design connects directly to the memory controller without a register. Builders who need registered DIMMs or lower latency timings cannot use this kit.

Matched Pair for Dual-Channel Operation

The package supplies two 16GB sticks pre-tested as a kit to enable dual-channel bandwidth on the target SuperMicro platform. NEMIX RAM stress-tests every module under load before shipment. Users who require a single 32GB module or a four-stick population must source a different configuration.

商品特色

  • ECC protection prevents data corruption in critical workloads
  • 32GB dual-channel kit expands SuperMicro SYS-530A-IL memory capacity
  • DDR4 3200 speed matches motherboard specifications for stable operation
  • 2V low voltage reduces system power consumption
  • 288-pin UDIMM design enables straightforward user installation

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

商品問答

What speed and data rate does this DDR4 3200 kit run at?

The kit runs at DDR4 3200 with a PC4-25600 rating, providing ECC error correction at 1.20 V.

Will these 288-pin UDIMMs fit the SuperMicro SYS-530A-IL workstation?

Yes, the 2 x 16 GB modules are 288-pin unbuffered UDIMMs validated for the SYS-530A-IL and X12SAE-5 platforms.

How do I install the two modules, and what step is often missed?

Power down, open the chassis, align each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16 GB sticks are detected.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。