เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

OWC

OWC 16GB DDR4 2666 CL19 2Rx8 VLP ECC UDIMM 288-pin 1.2V Supermicro X11SAE/F/SAT/F/SCA

SKU CH-3BBS-NKQ97

A 16 GB DDR4 ECC unbuffered DIMM running at 2666 MT/s with CL19 latency for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F and X11SCA motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16GB single module expands system memory for demanding workloads
  • DDR4 2666 speed delivers high data throughput for responsive operation
  • CL19 latency provides quick access times for smooth multitasking
  • ECC unbuffered design detects and corrects data errors automatically
  • Validated for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F, X11SCA motherboards

16 GB DDR4 ECC VLP UDIMM for Supermicro X11

This 16 GB DDR4 2666 module is built for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F and X11SCA motherboards. It delivers ECC protection and unbuffered operation in a very low profile form factor. The single DIMM upgrades compatible systems with JEDEC-standard reliability.

Thermals noise and power

Operating at 1.2 V, the module runs cool without a heat spreader. The very low profile height keeps airflow clear in dense server chassis. Unbuffered design avoids the extra power draw of registered DIMMs. Standard DDR4 2666 timing maintains efficient power use under load.

2Rx8 CL19 at DDR4 2666

The dual-rank 2Rx8 organisation with CL19 latency defines the module’s throughput on these platforms. Buyers needing higher capacity per slot or registered ECC should verify board support before ordering. This part is not for systems that require RDIMM or LRDIMM modules.

จุดเด่น

  • 16GB single module expands system memory for demanding workloads
  • DDR4 2666 speed delivers high data throughput for responsive operation
  • CL19 latency provides quick access times for smooth multitasking
  • ECC unbuffered design detects and corrects data errors automatically
  • Validated for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F, X11SCA motherboards

ข้อมูลจำเพาะ

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SAE
Supermicro Motherboard X11SAE-F
Supermicro Motherboard X11SAT
Supermicro Motherboard X11SAT-F
Supermicro Motherboard X11SCA

คำถามเกี่ยวกับสินค้านี้

How do I install the 288-pin DDR4 VLP ECC UDIMM on my Supermicro X11SAE, and what step is often missed?

Align the notch on the 288-pin DDR4 module with the slot key, press down firmly until both retention clips click, and verify the VLP height clears any CPU cooler — the step often missed is confirming both clips are fully locked.

What maintenance or replacement will the 16GB 2Rx8 ECC module need later?

No routine maintenance is required; if a correctable error count rises or the module fails, replace it with an identical 16GB DDR4 2666 CL19 2Rx8 VLP ECC UDIMM to keep matched capacity and timing.

What limit appears first when the 2666 CL19 1.2V kit runs under sustained load?

The CAS latency of CL19 at DDR4 2666 sets the timing ceiling; sustained workloads will hit that latency bound before voltage or thermal limits become a factor.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที