نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 2666 CL19 2Rx8 VLP ECC UDIMM 288-pin 1.2V Supermicro X11SAE/F/SAT/F/SCA

SKU CH-3BBS-NKQ97

A 16 GB DDR4 ECC unbuffered DIMM running at 2666 MT/s with CL19 latency for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F and X11SCA motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16GB single module expands system memory for demanding workloads
  • DDR4 2666 speed delivers high data throughput for responsive operation
  • CL19 latency provides quick access times for smooth multitasking
  • ECC unbuffered design detects and corrects data errors automatically
  • Validated for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F, X11SCA motherboards

16 GB DDR4 ECC VLP UDIMM for Supermicro X11

This 16 GB DDR4 2666 module is built for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F and X11SCA motherboards. It delivers ECC protection and unbuffered operation in a very low profile form factor. The single DIMM upgrades compatible systems with JEDEC-standard reliability.

Thermals noise and power

Operating at 1.2 V, the module runs cool without a heat spreader. The very low profile height keeps airflow clear in dense server chassis. Unbuffered design avoids the extra power draw of registered DIMMs. Standard DDR4 2666 timing maintains efficient power use under load.

2Rx8 CL19 at DDR4 2666

The dual-rank 2Rx8 organisation with CL19 latency defines the module’s throughput on these platforms. Buyers needing higher capacity per slot or registered ECC should verify board support before ordering. This part is not for systems that require RDIMM or LRDIMM modules.

أبرز المميزات

  • 16GB single module expands system memory for demanding workloads
  • DDR4 2666 speed delivers high data throughput for responsive operation
  • CL19 latency provides quick access times for smooth multitasking
  • ECC unbuffered design detects and corrects data errors automatically
  • Validated for Supermicro X11SAE, X11SAE-F, X11SAT, X11SAT-F, X11SCA motherboards

المواصفات

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SAE
Supermicro Motherboard X11SAE-F
Supermicro Motherboard X11SAT
Supermicro Motherboard X11SAT-F
Supermicro Motherboard X11SCA

أسئلة حول هذا المنتج

How do I install the 288-pin DDR4 VLP ECC UDIMM on my Supermicro X11SAE, and what step is often missed?

Align the notch on the 288-pin DDR4 module with the slot key, press down firmly until both retention clips click, and verify the VLP height clears any CPU cooler — the step often missed is confirming both clips are fully locked.

What maintenance or replacement will the 16GB 2Rx8 ECC module need later?

No routine maintenance is required; if a correctable error count rises or the module fails, replace it with an identical 16GB DDR4 2666 CL19 2Rx8 VLP ECC UDIMM to keep matched capacity and timing.

What limit appears first when the 2666 CL19 1.2V kit runs under sustained load?

The CAS latency of CL19 at DDR4 2666 sets the timing ceiling; sustained workloads will hit that latency bound before voltage or thermal limits become a factor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.