eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
SK hynix
64 GB DDR4-2666 CL19 load-reduced ECC module that removes channel rank limits to fit more DIMMs per channel at 1.20 V
This 64GB DDR4-2666 Load Reduced DIMM targets Intel S9248WK2HLC server platforms needing maximum memory density per channel. The 288-pin module operates at 1.20V with ECC and a CL19 latency. It suits virtualization hosts, in-memory databases and HPC clusters where standard registered DIMMs hit rank limits.
Load Reduced architecture buffers the data and command signals, lowering the electrical load on the memory bus so more modules can populate each channel without signal degradation. This maintains bandwidth under continuous heavy workloads such as large-scale virtualization or big-data analytics where all channels run fully populated for long periods.
The module upgrades systems constrained by standard RDIMM rank limits, allowing higher total capacity per server without changing the platform. The jump is worthwhile when current memory channels cannot accept more ranks but the application demands more than 64GB per DIMM slot or needs the extra bandwidth that comes from filling every channel. Buyers whose servers already reach required capacity with standard RDIMMs gain no advantage.
| Brand | SK hynix |
|---|---|
| Model | HMAA8GL7AMR4N-VK |
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Eliminate channel ranking limitations associated with standard RDIMMs Enable more installed DIMMs per channel for greater memory density More memory bandwidth than standard RDIMMs More energy efficient than standard RDIMMs 100% component and module tested to mission-critical server standards Compatible with OEM servers and warranties Optimized for Intel Xeon processor product families |
The module runs at 1.20V, the standard DDR4 voltage, so power draw stays within the JEDEC limit for 2666 MT/s LRDIMMs.
A server board with DDR4 slots that support LRDIMM, ECC, and 4Rx4 addressing is required; standard RDIMM-only or UDIMM-only platforms will not work.
No — LRDIMMs and RDIMMs cannot be mixed on a channel; all existing RDIMMs must be removed before installing these modules.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม