NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SK hynix
64 GB DDR4-2666 CL19 load-reduced ECC module that removes channel rank limits to fit more DIMMs per channel at 1.20 V
This 64GB DDR4-2666 Load Reduced DIMM targets Intel S9248WK2HLC server platforms needing maximum memory density per channel. The 288-pin module operates at 1.20V with ECC and a CL19 latency. It suits virtualization hosts, in-memory databases and HPC clusters where standard registered DIMMs hit rank limits.
Load Reduced architecture buffers the data and command signals, lowering the electrical load on the memory bus so more modules can populate each channel without signal degradation. This maintains bandwidth under continuous heavy workloads such as large-scale virtualization or big-data analytics where all channels run fully populated for long periods.
The module upgrades systems constrained by standard RDIMM rank limits, allowing higher total capacity per server without changing the platform. The jump is worthwhile when current memory channels cannot accept more ranks but the application demands more than 64GB per DIMM slot or needs the extra bandwidth that comes from filling every channel. Buyers whose servers already reach required capacity with standard RDIMMs gain no advantage.
| Brand | SK hynix |
|---|---|
| Model | HMAA8GL7AMR4N-VK |
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Eliminate channel ranking limitations associated with standard RDIMMs Enable more installed DIMMs per channel for greater memory density More memory bandwidth than standard RDIMMs More energy efficient than standard RDIMMs 100% component and module tested to mission-critical server standards Compatible with OEM servers and warranties Optimized for Intel Xeon processor product families |
The module runs at 1.20V, the standard DDR4 voltage, so power draw stays within the JEDEC limit for 2666 MT/s LRDIMMs.
A server board with DDR4 slots that support LRDIMM, ECC, and 4Rx4 addressing is required; standard RDIMM-only or UDIMM-only platforms will not work.
No — LRDIMMs and RDIMMs cannot be mixed on a channel; all existing RDIMMs must be removed before installing these modules.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?