Three black 120 mm square fans with four LED rings each, 25 mm thick

Thermaltake

Thermaltake Riing Quad CL-F088-PL12SW-B 120 mm case fan 3-pack

SKU CH-HX72-6FTPJ MPN CL-F088-PL12SW-B

Three 120 mm fans with four LED rings totalling 54 RGB LEDs, hydraulic bearings, 500-1500 RPM and 40.9 CFM maximum airflow

Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM500 - 1500 R.P.M

Four independent RGB rings with 54 LEDs enable 16.8 million colour options
Hydraulic bearing runs at 25 dBA for quiet operation
PWM speed range 500 to 1500 RPM delivers up to 40.9 CFM airflow
9-pin USB 2.0 connector simplifies software control via NeonMaker
120 mm frame with rubber pads reduces vibration in case or radiator mounts

US$95.99

0.00122366 BTC ตามอัตราแลกเปลี่ยนวันนี้

มีสินค้า · จัดส่งวันนี้

การชำระเงินจะล็อกอัตราแลกเปลี่ยนของคุณไว้ 30 นาที

จัดส่งไปยัง สหรัฐอเมริกา ประมาณการ

UPS Worldwide Expedited 3–6 วันทำการ US$39.90
DHL Express Worldwide 2–3 วันทำการ US$74.90

เพิ่มอีก US$303.01 แล้วรับการจัดส่งมาตรฐานฟรี

ภาษีนำเข้าจะถูกเรียกเก็บโดยประเทศของคุณเมื่อสินค้ามาถึง

จัดส่งที่อื่น

Three-pack 120 mm RGB fans

The Thermaltake Riing Quad CL-F088-PL12SW-B delivers three 120 mm case fans with four LED rings each. Fifty-four addressable LEDs per fan produce 16.8 million colour combinations controlled via NeonMaker software. A hydraulic bearing and nine-blade design target quiet airflow for cases or radiators. Black frames and rubber padding complete the package.

Upgrade from single-ring or non-RGB fans

Builders replacing basic 120 mm fans gain per-ring lighting control and a wider speed range of 500 to 1500 RPM. The included controller connects through a USB 2.0 header, removing the need for a separate RGB header on the motherboard. Maximum airflow reaches 40.9 CFM at 25 dBA, so the jump is worthwhile when both lighting granularity and low noise matter.

Suits RGB-focused builds with USB headers

This kit fits users who want synchronised multi-ring effects and software-driven profiles without occupying a 5 V ARGB header. It is less suited for systems lacking a free USB 2.0 internal connector or for builders who prefer pure white or single-colour illumination. Radiator mounting is supported, though static-pressure figures are not supplied.

จุดเด่น

Four independent RGB rings with 54 LEDs enable 16.8 million colour options
Hydraulic bearing runs at 25 dBA for quiet operation
PWM speed range 500 to 1500 RPM delivers up to 40.9 CFM airflow
9-pin USB 2.0 connector simplifies software control via NeonMaker
120 mm frame with rubber pads reduces vibration in case or radiator mounts

ข้อมูลจำเพาะ

Brand	Thermaltake
Series	Riing Quad
Model	CL-F088-PL12SW-B
Fan Counts	3 Fans
Fan Controller	Controller
Type	Case Fan
Fan Thickness	25mm
Bearing Type	Hydraulic Bearing
RPM	500 - 1500 R.P.M
Air Flow	40.9 CFM (Max)
Noise Level	25 dBA
Power Connector	USB 2.0 connectors (9 Pin)
Color	Black
LED	RGB
Features	4 light rings at the front 54 LEDs in total. Set up your spectacular lighting. Hydraulic bearing with low-noise design.
Dimensions	120 x 120 x 25 mm
น้ำหนักในการจัดส่ง	0.91 kg
ขนาดบรรจุภัณฑ์	185 × 142 × 94 mm

คำถามเกี่ยวกับสินค้านี้

Will the 120 mm fans with 25 mm thickness fit my case fan slots?

Each fan measures 120 x 120 x 25 mm, the standard size for most 120 mm mounting points in cases and on radiators.

How do I connect the three fans and the controller using the 9-pin USB 2.0 connectors?

Plug each fan into the included controller, then connect the controller to a single internal USB 2.0 9-pin header on the motherboard for power and software control.

When should I expect to replace the hydraulic bearings in these fans?

The hydraulic bearing is rated for long life under the 500-1500 RPM range; replacement is typically only needed if noise increases noticeably after several years of continuous use.

อื่น ๆ ในหมวดนี้