Thermaltake
Thermaltake Riing Quad CL-F088-PL12SW-B 120 mm case fan 3-pack
Three 120 mm fans with four LED rings totalling 54 RGB LEDs, hydraulic bearings, 500-1500 RPM and 40.9 CFM maximum airflow
- Fan Counts3 Fans
- Fan ControllerController
- TypeCase Fan
- Fan Thickness25mm
- Bearing TypeHydraulic Bearing
- RPM500 - 1500 R.P.M
- Four independent RGB rings with 54 LEDs enable 16.8 million colour options
- Hydraulic bearing runs at 25 dBA for quiet operation
- PWM speed range 500 to 1500 RPM delivers up to 40.9 CFM airflow
- 9-pin USB 2.0 connector simplifies software control via NeonMaker
- 120 mm frame with rubber pads reduces vibration in case or radiator mounts
Three-pack 120 mm RGB fans
The Thermaltake Riing Quad CL-F088-PL12SW-B delivers three 120 mm case fans with four LED rings each. Fifty-four addressable LEDs per fan produce 16.8 million colour combinations controlled via NeonMaker software. A hydraulic bearing and nine-blade design target quiet airflow for cases or radiators. Black frames and rubber padding complete the package.
Upgrade from single-ring or non-RGB fans
Builders replacing basic 120 mm fans gain per-ring lighting control and a wider speed range of 500 to 1500 RPM. The included controller connects through a USB 2.0 header, removing the need for a separate RGB header on the motherboard. Maximum airflow reaches 40.9 CFM at 25 dBA, so the jump is worthwhile when both lighting granularity and low noise matter.
Suits RGB-focused builds with USB headers
This kit fits users who want synchronised multi-ring effects and software-driven profiles without occupying a 5 V ARGB header. It is less suited for systems lacking a free USB 2.0 internal connector or for builders who prefer pure white or single-colour illumination. Radiator mounting is supported, though static-pressure figures are not supplied.
Přednosti
- Four independent RGB rings with 54 LEDs enable 16.8 million colour options
- Hydraulic bearing runs at 25 dBA for quiet operation
- PWM speed range 500 to 1500 RPM delivers up to 40.9 CFM airflow
- 9-pin USB 2.0 connector simplifies software control via NeonMaker
- 120 mm frame with rubber pads reduces vibration in case or radiator mounts
Specifikace
| Brand | Thermaltake |
|---|---|
| Series | Riing Quad |
| Model | CL-F088-PL12SW-B |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 500 - 1500 R.P.M |
| Air Flow | 40.9 CFM (Max) |
| Noise Level | 25 dBA |
| Power Connector | USB 2.0 connectors (9 Pin) |
| Color | Black |
| LED | RGB |
| Features | 4 light rings at the front 54 LEDs in total. Set up your spectacular lighting. Hydraulic bearing with low-noise design. |
| Dimensions | 120 x 120 x 25 mm |
| Přepravní hmotnost | 0.91 kg |
| Rozměry balení | 185 × 142 × 94 mm |
Otázky k tomuto produktu
Will the 120 mm fans with 25 mm thickness fit my case fan slots?
Each fan measures 120 x 120 x 25 mm, the standard size for most 120 mm mounting points in cases and on radiators.
How do I connect the three fans and the controller using the 9-pin USB 2.0 connectors?
Plug each fan into the included controller, then connect the controller to a single internal USB 2.0 9-pin header on the motherboard for power and software control.
When should I expect to replace the hydraulic bearings in these fans?
The hydraulic bearing is rated for long life under the 500-1500 RPM range; replacement is typically only needed if noise increases noticeably after several years of continuous use.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001041BTC
Skladem