我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Thermaltake

Thermaltake Riing Quad CL-F088-PL12SW-B 120 mm case fan 3-pack

SKU CH-HX72-6FTPJ MPN CL-F088-PL12SW-B

Three 120 mm fans with four LED rings totalling 54 RGB LEDs, hydraulic bearings, 500-1500 RPM and 40.9 CFM maximum airflow

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPM500 - 1500 R.P.M
  • Four independent RGB rings with 54 LEDs enable 16.8 million colour options
  • Hydraulic bearing runs at 25 dBA for quiet operation
  • PWM speed range 500 to 1500 RPM delivers up to 40.9 CFM airflow
  • 9-pin USB 2.0 connector simplifies software control via NeonMaker
  • 120 mm frame with rubber pads reduces vibration in case or radiator mounts

Three-pack 120 mm RGB fans

The Thermaltake Riing Quad CL-F088-PL12SW-B delivers three 120 mm case fans with four LED rings each. Fifty-four addressable LEDs per fan produce 16.8 million colour combinations controlled via NeonMaker software. A hydraulic bearing and nine-blade design target quiet airflow for cases or radiators. Black frames and rubber padding complete the package.

Upgrade from single-ring or non-RGB fans

Builders replacing basic 120 mm fans gain per-ring lighting control and a wider speed range of 500 to 1500 RPM. The included controller connects through a USB 2.0 header, removing the need for a separate RGB header on the motherboard. Maximum airflow reaches 40.9 CFM at 25 dBA, so the jump is worthwhile when both lighting granularity and low noise matter.

Suits RGB-focused builds with USB headers

This kit fits users who want synchronised multi-ring effects and software-driven profiles without occupying a 5 V ARGB header. It is less suited for systems lacking a free USB 2.0 internal connector or for builders who prefer pure white or single-colour illumination. Radiator mounting is supported, though static-pressure figures are not supplied.

商品特色

  • Four independent RGB rings with 54 LEDs enable 16.8 million colour options
  • Hydraulic bearing runs at 25 dBA for quiet operation
  • PWM speed range 500 to 1500 RPM delivers up to 40.9 CFM airflow
  • 9-pin USB 2.0 connector simplifies software control via NeonMaker
  • 120 mm frame with rubber pads reduces vibration in case or radiator mounts

商品規格

BrandThermaltake
SeriesRiing Quad
ModelCL-F088-PL12SW-B
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM500 - 1500 R.P.M
Air Flow40.9 CFM (Max)
Noise Level25 dBA
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
Features4 light rings at the front 54 LEDs in total.
Set up your spectacular lighting.
Hydraulic bearing with low-noise design.
Dimensions120 x 120 x 25 mm
出貨重量0.91 kg
包裝尺寸185 × 142 × 94 mm

商品問答

Will the 120 mm fans with 25 mm thickness fit my case fan slots?

Each fan measures 120 x 120 x 25 mm, the standard size for most 120 mm mounting points in cases and on radiators.

How do I connect the three fans and the controller using the 9-pin USB 2.0 connectors?

Plug each fan into the included controller, then connect the controller to a single internal USB 2.0 9-pin header on the motherboard for power and software control.

When should I expect to replace the hydraulic bearings in these fans?

The hydraulic bearing is rated for long life under the 500-1500 RPM range; replacement is typically only needed if noise increases noticeably after several years of continuous use.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。