TOPOWER
TOPOWER TOP-1600WM1 1600W mining hardware
Delivers 1600 W to mining rigs with 16 PCIe 6+2P connectors for up to eight GPUs, active PFC and a 135 mm fan
- TypeATX 12V / EPS 12V
- Maximum Power1600 W
- Fans1
- PFCActive
- Main Connector20+4 Pin
- +12V RailsSingle
- Delivers 1600 W for multi-GPU mining rigs
- Wide 100 – 240 V input suits global mains
- Single +12 V rail rated at 128 A feeds all cards
- Sixteen PCI-E 6+2P connectors power up to eight GPUs
- 135 mm fan and active PFC keep thermals in check
1600W Mining Power Supply
This TOPOWER TOP-1600WM1 unit delivers 1600 W for cryptocurrency mining rigs. It supports up to eight graphics cards for coins such as BTC, ETH, LTC and XMR. The single +12 V rail provides 128 A for stable GPU loads. Active PFC handles input from 100 to 240 V at 50 or 60 Hz.
Non-modular ATX Installation
The supply uses a fixed 20+4 pin main connector and sixteen 6+2P PCI-Express leads. Its 165 mm length fits standard ATX mining chassis. A single 135 mm fan cools the unit. Cable routing must account for all sixteen PCIe plugs and eight SATA connectors. Ensure the case has enough depth for the non-modular harness.
Pre-purchase Compatibility Checks
Verify the motherboard accepts a 20+4 pin ATX connector and that the chassis clears 165 mm depth. Confirm the AC supply operates within 100 to 240 V range. Count the required PCIe 6+2P connections for each GPU. Check that the single +12 V rail design matches the rig power distribution plan.
จุดเด่น
- Delivers 1600 W for multi-GPU mining rigs
- Wide 100 – 240 V input suits global mains
- Single +12 V rail rated at 128 A feeds all cards
- Sixteen PCI-E 6+2P connectors power up to eight GPUs
- 135 mm fan and active PFC keep thermals in check
ข้อมูลจำเพาะ
| Brand | TOPOWER |
|---|---|
| Series | MINING |
| Model | TOP-1600WM1 |
| Type | ATX 12V / EPS 12V |
| Maximum Power | 1600 W |
| Fans | 1 |
| PFC | Active |
| Main Connector | 20+4 Pin |
| +12V Rails | Single |
| PCI-Express Connector | 16 x 6+2P |
| SATA Power Connector | 8 |
| SLI | Ready |
| CrossFire | Ready |
| Max PSU Length | 165 mm |
| Modular | No |
| Efficiency | > 85% |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Power Rating | 1600W |
| +3.3V Max. Current | 20A |
| +5V Max. Current | 20A |
| +12V1 Max. Current | 128A |
| -12V Max. Current | 0.5A |
| +5VSB Max. Current | 3A |
| 12V Power Connector | 1 x 4+4 Pin ATX/EPS 12V |
| Peripheral Connector | 6 |
| Fans Total Quantity | 1 |
| Top Fans Size | 135mm |
คำถามเกี่ยวกับสินค้านี้
Will this power supply fit inside a standard ATX mining chassis?
The unit is 165 mm long and uses an ATX 12V form factor, so it fits most standard mining frames that accept ATX supplies.
Can I run eight graphics cards from the native connectors?
Yes, the supply provides sixteen 6+2-pin PCIe connectors, enough for eight dual-connector GPUs without adapters.
What AC voltage range does the unit accept for worldwide use?
The input range is 100 to 240 V at 50 or 60 Hz, so it works on mains power in most countries.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



