เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Toshiba

Toshiba MK2533GSG 250GB 5400 RPM 16MB 1.8" internal hard drive

SKU CH-KMM5-Z7KVS MPN MK2533GSG

A 1.8-inch 250 GB internal hard drive spinning at 5400 RPM with 16 MB cache and a 15 ms average seek time

  • InterfaceSerial ATA Revision 3.0
  • Capacity250GB
  • RPM5400 RPM
  • Cache16MB
  • Average Seek Time15ms
  • Average Latency5.6ms
  • 250 GB capacity stores large media libraries
  • 5400 RPM spindle delivers steady throughput for everyday tasks
  • 16 MB cache buffers bursts for smoother access
  • Serial ATA Revision 3.0 interface connects to compatible bays
  • 8 inch form factor fits slim drive slots

1.8-inch 250 GB internal drive

The Toshiba MK2533GSG is a 1.8-inch internal hard drive with a 250 GB capacity, 5400 RPM spindle speed and 16 MB cache. It connects through a Serial ATA Revision 3.0 interface and operates on a 3.3 V supply. The drive is supplied new and meets RoHS compliance requirements.

Suits space-constrained legacy systems

Builders working on older ultraportable laptops, compact embedded appliances or industrial equipment that require a 1.8-inch form factor will find this drive a direct fit. Systems that need higher throughput, larger capacities or a 2.5-inch or 3.5-inch form factor should consider other options.

5400 RPM spindle speed decides fit

The 5400 RPM rotation rate determines the drive’s 15 ms average seek time, 5.6 ms latency and 3 Gb/sec host transfer rate. If the application demands faster random access or sustained throughput, a higher spindle speed or solid-state alternative would be required.

จุดเด่น

  • 250 GB capacity stores large media libraries
  • 5400 RPM spindle delivers steady throughput for everyday tasks
  • 16 MB cache buffers bursts for smoother access
  • Serial ATA Revision 3.0 interface connects to compatible bays
  • 8 inch form factor fits slim drive slots

ข้อมูลจำเพาะ

BrandTOSHIBA
SeriesMKxx33GSG Series
ModelMK2533GSG
InterfaceSerial ATA Revision 3.0
Capacity250GB
RPM5400 RPM
Cache16MB
Average Seek Time15ms
Average Latency5.6ms
FeaturesRoHS Compliant: Yes
Transfer Rate to Host: 3 Gb/sec
Track-to-track Seek: 3ms
Power Requirements:
Voltage: 3.3V (+/- 5%)
Spin up (start) Power: 2.5 watts
Seek Power: 1.3 watts
Read/Write Power: 1.3 watts
Low Power Idle: 0.40 watts
Standby Power: 0.18 watts
Sleep Power: 0.13 watts
Dimensions (W) x (D) x (H): 54.0 mm (2.13") x 78.5 mm (3.0") x 8.0 mm (0.31")
Weight: 62 g (2.19 oz)
Environmental:
Temp - Operating: 5° to 65°C (41° to 149°F)
Temp - Non-Operating: -40° to 65° C (-40° to 149°F)
Vibration - Operating: 19.6 m/s² (2.0G) 15 to 500 Hz
Vibration - Non-Operating: 49 m/s² (5.0G) 15
Form Factor1.8"
น้ำหนักในการจัดส่ง0.91 kg
ขนาดบรรจุภัณฑ์152 × 127 × 25 mm

คำถามเกี่ยวกับสินค้านี้

What physical space is needed to fit the 1.8 inch 54.0 mm by 78.5 mm by 8.0 mm drive?

The drive measures 54.0 mm wide, 78.5 mm deep and 8.0 mm high, so the bay or adapter must provide at least those clearances.

Which connectors must be aligned when installing the Serial ATA Revision 3.0 drive?

Match the drive's Serial ATA Revision 3.0 data and power connectors to the host ports, press straight in until fully seated, then secure the 62 g unit with the correct screws.

When should the drive be replaced based on its operating temperature range?

Replace the drive if it consistently runs outside the 5° to 65°C operating range or if SMART data shows reallocated sectors.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที