نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small silver rectangular 1.8 inch hard drive with circuit board visible

Toshiba

Toshiba MK2533GSG 250GB 5400 RPM 16MB 1.8" internal hard drive

SKU CH-KMM5-Z7KVS MPN MK2533GSG

A 1.8-inch 250 GB internal hard drive spinning at 5400 RPM with 16 MB cache and a 15 ms average seek time

  • InterfaceSerial ATA Revision 3.0
  • Capacity250GB
  • RPM5400 RPM
  • Cache16MB
  • Average Seek Time15ms
  • Average Latency5.6ms
  • 250 GB capacity stores large media libraries
  • 5400 RPM spindle delivers steady throughput for everyday tasks
  • 16 MB cache buffers bursts for smoother access
  • Serial ATA Revision 3.0 interface connects to compatible bays
  • 8 inch form factor fits slim drive slots

1.8-inch 250 GB internal drive

The Toshiba MK2533GSG is a 1.8-inch internal hard drive with a 250 GB capacity, 5400 RPM spindle speed and 16 MB cache. It connects through a Serial ATA Revision 3.0 interface and operates on a 3.3 V supply. The drive is supplied new and meets RoHS compliance requirements.

Suits space-constrained legacy systems

Builders working on older ultraportable laptops, compact embedded appliances or industrial equipment that require a 1.8-inch form factor will find this drive a direct fit. Systems that need higher throughput, larger capacities or a 2.5-inch or 3.5-inch form factor should consider other options.

5400 RPM spindle speed decides fit

The 5400 RPM rotation rate determines the drive’s 15 ms average seek time, 5.6 ms latency and 3 Gb/sec host transfer rate. If the application demands faster random access or sustained throughput, a higher spindle speed or solid-state alternative would be required.

أبرز المميزات

  • 250 GB capacity stores large media libraries
  • 5400 RPM spindle delivers steady throughput for everyday tasks
  • 16 MB cache buffers bursts for smoother access
  • Serial ATA Revision 3.0 interface connects to compatible bays
  • 8 inch form factor fits slim drive slots

المواصفات

BrandTOSHIBA
SeriesMKxx33GSG Series
ModelMK2533GSG
InterfaceSerial ATA Revision 3.0
Capacity250GB
RPM5400 RPM
Cache16MB
Average Seek Time15ms
Average Latency5.6ms
FeaturesRoHS Compliant: Yes
Transfer Rate to Host: 3 Gb/sec
Track-to-track Seek: 3ms
Power Requirements:
Voltage: 3.3V (+/- 5%)
Spin up (start) Power: 2.5 watts
Seek Power: 1.3 watts
Read/Write Power: 1.3 watts
Low Power Idle: 0.40 watts
Standby Power: 0.18 watts
Sleep Power: 0.13 watts
Dimensions (W) x (D) x (H): 54.0 mm (2.13") x 78.5 mm (3.0") x 8.0 mm (0.31")
Weight: 62 g (2.19 oz)
Environmental:
Temp - Operating: 5° to 65°C (41° to 149°F)
Temp - Non-Operating: -40° to 65° C (-40° to 149°F)
Vibration - Operating: 19.6 m/s² (2.0G) 15 to 500 Hz
Vibration - Non-Operating: 49 m/s² (5.0G) 15
Form Factor1.8"
وزن الشحنة0.91 kg
أبعاد الطرد152 × 127 × 25 mm

أسئلة حول هذا المنتج

What physical space is needed to fit the 1.8 inch 54.0 mm by 78.5 mm by 8.0 mm drive?

The drive measures 54.0 mm wide, 78.5 mm deep and 8.0 mm high, so the bay or adapter must provide at least those clearances.

Which connectors must be aligned when installing the Serial ATA Revision 3.0 drive?

Match the drive's Serial ATA Revision 3.0 data and power connectors to the host ports, press straight in until fully seated, then secure the 62 g unit with the correct screws.

When should the drive be replaced based on its operating temperature range?

Replace the drive if it consistently runs outside the 5° to 65°C operating range or if SMART data shows reallocated sectors.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.