SPARTAN
SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
$1,504.99
0.01863142BTC
在庫あり
Toshiba
Toshiba MK2533GSG 250GB 5400 RPM 16MB 1.8" internal hard drive
A 1.8-inch 250 GB internal hard drive spinning at 5400 RPM with 16 MB cache and a 15 ms average seek time
- InterfaceSerial ATA Revision 3.0
- Capacity250GB
- RPM5400 RPM
- Cache16MB
- Average Seek Time15ms
- Average Latency5.6ms
- 250 GB capacity stores large media libraries
- 5400 RPM spindle delivers steady throughput for everyday tasks
- 16 MB cache buffers bursts for smoother access
- Serial ATA Revision 3.0 interface connects to compatible bays
- 8 inch form factor fits slim drive slots
1.8-inch 250 GB internal drive
The Toshiba MK2533GSG is a 1.8-inch internal hard drive with a 250 GB capacity, 5400 RPM spindle speed and 16 MB cache. It connects through a Serial ATA Revision 3.0 interface and operates on a 3.3 V supply. The drive is supplied new and meets RoHS compliance requirements.
Suits space-constrained legacy systems
Builders working on older ultraportable laptops, compact embedded appliances or industrial equipment that require a 1.8-inch form factor will find this drive a direct fit. Systems that need higher throughput, larger capacities or a 2.5-inch or 3.5-inch form factor should consider other options.
5400 RPM spindle speed decides fit
The 5400 RPM rotation rate determines the drive’s 15 ms average seek time, 5.6 ms latency and 3 Gb/sec host transfer rate. If the application demands faster random access or sustained throughput, a higher spindle speed or solid-state alternative would be required.
特長
- 250 GB capacity stores large media libraries
- 5400 RPM spindle delivers steady throughput for everyday tasks
- 16 MB cache buffers bursts for smoother access
- Serial ATA Revision 3.0 interface connects to compatible bays
- 8 inch form factor fits slim drive slots
仕様
| Brand | TOSHIBA |
|---|---|
| Series | MKxx33GSG Series |
| Model | MK2533GSG |
| Interface | Serial ATA Revision 3.0 |
| Capacity | 250GB |
| RPM | 5400 RPM |
| Cache | 16MB |
| Average Seek Time | 15ms |
| Average Latency | 5.6ms |
| Features | RoHS Compliant: Yes Transfer Rate to Host: 3 Gb/sec Track-to-track Seek: 3ms Power Requirements: Voltage: 3.3V (+/- 5%) Spin up (start) Power: 2.5 watts Seek Power: 1.3 watts Read/Write Power: 1.3 watts Low Power Idle: 0.40 watts Standby Power: 0.18 watts Sleep Power: 0.13 watts Dimensions (W) x (D) x (H): 54.0 mm (2.13") x 78.5 mm (3.0") x 8.0 mm (0.31") Weight: 62 g (2.19 oz) Environmental: Temp - Operating: 5° to 65°C (41° to 149°F) Temp - Non-Operating: -40° to 65° C (-40° to 149°F) Vibration - Operating: 19.6 m/s² (2.0G) 15 to 500 Hz Vibration - Non-Operating: 49 m/s² (5.0G) 15 |
| Form Factor | 1.8" |
| 配送重量 | 0.91 kg |
| 梱包サイズ | 152 × 127 × 25 mm |
この商品に関する質問
What physical space is needed to fit the 1.8 inch 54.0 mm by 78.5 mm by 8.0 mm drive?
The drive measures 54.0 mm wide, 78.5 mm deep and 8.0 mm high, so the bay or adapter must provide at least those clearances.
Which connectors must be aligned when installing the Serial ATA Revision 3.0 drive?
Match the drive's Serial ATA Revision 3.0 data and power connectors to the host ports, press straight in until fully seated, then secure the 62 g unit with the correct screws.
When should the drive be replaced based on its operating temperature range?
Replace the drive if it consistently runs outside the 5° to 65°C operating range or if SMART data shows reallocated sectors.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Acumen Disc
Acumen Disc H11-SATA150 1-to-11 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 11
$1,633.99
0.02022841BTC
在庫あり