نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green DDR3 server memory sticks, 240-pin RDIMM, 1.5V

A-Tech

A-Tech 32GB (4x8GB) DDR3 1333 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM

SKU CH-EXC4-Y714Y

A 32 GB DDR3 1333 ECC registered quad-channel kit for compatible servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1333 MHz CL9 speed accelerates data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 2Rx4 dual-rank organisation optimises memory density
  • 5 V standard voltage ensures broad platform compatibility

32GB DDR3 ECC RDIMM Kit

This 32GB kit contains four 8GB DDR3 1333 registered ECC modules built for servers and workstations that require registered memory. The dual-rank x4 organisation and CL9 latency suit multi-socket platforms needing error correction and signal integrity. It is not compatible with desktop or laptop computers that accept only unbuffered DIMMs.

Quad-Channel Registered Upgrade

The four-module kit populates a quad-channel memory controller, so each channel receives one 8GB rank-balanced DIMM. Registered buffering reduces electrical load on the memory bus, freeing the processor to address larger capacities without timing penalties. Verify that your system manual specifies DDR3 RDIMM support and the correct channel population order before installation.

Sustained Load Behaviour

ECC circuitry detects and corrects single-bit errors during continuous operation, preventing data corruption in long-running workloads. Standard 1.5V DDR3 voltage maintains stable power draw across extended duty cycles. Major-brand chips are tested for reliable performance under sustained server and workstation loads.

أبرز المميزات

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1333 MHz CL9 speed accelerates data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 2Rx4 dual-rank organisation optimises memory density
  • 5 V standard voltage ensures broad platform compatibility

المواصفات

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-10600R
Capacity32GB (4 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the DDR3 1333 MHz speed become the bottleneck when the server runs at full load for hours?

The modules run at 1333 MHz with CL9 latency; sustained throughput is capped by that bus speed and the registered buffer, so the memory subsystem will limit performance before the CPU does.

How much heat and power do the four 1.5 V registered DIMMs add when the system runs continuously?

Each 8 GB module operates at the standard 1.5 V DDR3 voltage; registered DIMMs draw slightly more power than unbuffered types, but total heat stays within normal server DIMM limits for 24/7 operation.

What motherboard feature must my server already have to accept this quad-channel 240-pin ECC RDIMM kit?

The board must provide DDR3 registered DIMM slots with ECC support and a memory controller that can address 2Rx4 modules in a quad-channel configuration.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.