A-Tech 32GB (4x8GB) DDR3 1866 ECC RDIMM 1Rx4 1.5V server RAM
- 32GB (4 x 8GB)
- DDR3 1866 (PC3 1490…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 32 GB quad-channel kit of DDR3L 1333 ECC registered DIMMs for servers and workstations
Capacity 32GB (4 x 8GB)
Speed DDR3L 1333 (PC3L 10600)
This 32GB kit contains four 8GB DDR3L 1333 registered DIMMs with ECC. It is built for servers and workstations that require registered, dual-rank x4 modules running at 1.35 volts. The memory is not compatible with standard desktop or laptop computers.
The modules use the 240-pin DDR3L form factor and operate at PC3L-10600 speed with CL9 latency. Registered buffering and ECC add command-cycle overhead that desktop platforms cannot support, so the kit will only function in systems designed for registered DDR3L memory.
Check your system manual to confirm it accepts DDR3L registered ECC DIMMs in a quad-channel configuration. Ensure the motherboard supports 2Rx4 organisation and can run memory at 1.35 volts or 1.5 volts. Desktop boards and consumer laptops will not accept these modules.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx4 PC3L-10600R |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This kit provides 32 GB total across four 8 GB modules, giving you a balanced quad-channel population for supported server and workstation boards.
The modules run at DDR3L 1333 with CL9 timing, delivering the standard PC3L-10600 data rate when installed in a compatible registered DIMM slot.
The modules operate at 1.35 V and are also rated for 1.5 V, so they work in any DDR3/DDR3L server or workstation that accepts registered ECC RDIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟