A-Tech 32GB (4x8GB) DDR3 1600 ECC RDIMM 1Rx4 1.5V Server RAM
- 32GB (4 x 8GB)
- DDR3 1600 (PC3 1280…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB quad-channel DDR3L 1600 ECC registered server memory kit running at 1.35 V
Capacity 32GB (4 x 8GB)
Speed DDR3L 1600 (PC3L 12800)
This 32 GB quad-channel kit contains four 8 GB DDR3L 1600 registered ECC DIMMs built for servers and workstations. Each module runs at 1.35 V with CL11 latency and a 2Rx4 dual-rank layout on 240-pin form factor. It is not compatible with desktop or laptop computers.
Low-voltage DDR3L operation at 1.35 V reduces power draw and heat output compared with standard 1.5 V DDR3 modules. Registered buffering lightens the electrical load on the memory controller, helping stability under sustained workloads. No active cooling is included or required for normal server use.
The matched quad-channel set enables full bandwidth on platforms that support four-channel memory architectures. ECC error correction detects and corrects single-bit errors to protect data integrity in critical applications. Lifetime warranty and US-based technical support are provided by the manufacturer.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx4 PC3L-12800R |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Power down the server, open the chassis, align each module's notch with the DDR3 DIMM slot key, press firmly until the retention clips lock, then populate all four channels per the system manual to enable quad-channel operation.
No scheduled maintenance is required; ECC error correction and the registered buffer operate transparently, so only reseat the modules if the system reports correctable errors after a hardware move.
CL11 at 1600 MHz sets the minimum access delay; once the memory controller saturates bandwidth, latency dominates response time rather than throughput.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟