OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for IBM-Lenovo servers
This 32GB DDR4 3200MHz PC4-25600 registered DIMM delivers error-correcting code memory for server and workstation platforms. It operates at 1.20V with CL22 latency and a 2Rx8 organisation using major-brand chips. The 288-pin module is built as a direct replacement for IBM-Lenovo part numbers 02JG183, 4X77A08634, 4X77A12188 and 4ZC7A15123.
Administrators upgrading compatible IBM-Lenovo systems or other servers that require registered ECC DDR4 at 3200MHz will find this module matches the specified voltage, rank and pin count. Builders whose platforms only accept unbuffered non-ECC UDIMMs, demand a different DDR generation, or require lower or higher capacities per slot cannot use this part.
The registered buffer and ECC functionality are mandatory for the target server chipsets; a standard unbuffered DIMM will not operate in these slots. Confirm that your system Qualified Vendor List includes 2Rx8 PC4-25600 registered modules before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 3200 MT/s with a peak transfer rate of 25600 MB/s; actual bandwidth depends on the memory controller and channel configuration of the host system.
It uses the standard 288-pin DDR4 DIMM form factor and registered signalling, so it fits any server or workstation board that accepts DDR4 RDIMMs and has an open slot.
Power down, open the chassis, align the notch with the keyed slot, press firmly until both latches click, then enter the BIOS to confirm ECC is enabled and the speed is set to 3200 MT/s.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟