OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
64 GB DDR4 2400 ECC load-reduced DIMM with CL17 latency and 4Rx4 organisation for high-density server memory upgrades
This A-Tech module delivers 64GB of DDR4 memory in a single 288-pin LRDIMM package. It operates at 2400MHz with a CAS latency of 17 and runs at the standard 1.2V voltage. The load-reduced design and ECC support target server and workstation platforms that require high-density, error-correcting memory.
The 4Rx4 organisation and load-reduced architecture reduce electrical loading on the memory bus, helping maintain signal integrity when all slots are populated. ECC circuitry detects and corrects single-bit errors during continuous operation, while the major-brand chipset and 1.20V operation keep power draw stable under extended workloads.
Verify that your motherboard supports DDR4 LRDIMM modules and accepts 4Rx4 ranks at the 2400MHz data rate. Confirm the system BIOS recognises 64GB single-module capacity and that the platform’s qualified-vendor list includes this specification. Ensure the DIMM slot keying matches the 288-pin DDR4 form factor before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Each module operates at the standard DDR4 voltage of 1.2V, keeping power draw low for high-density 4Rx4 server configurations.
A DDR4 server platform with a 288-pin DIMM slot and a CPU memory controller that supports Load Reduced ECC memory is required.
Mixing LRDIMMs with standard RDIMMs on the same memory channel is not supported; all slots in a channel must use the same module type.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟