نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

A-Tech

A-Tech 8GB (2x4GB) DDR4 2400 ECC SODIMM CL17 1.2V 260-Pin Kit

SKU CH-9TKN-7KC8Z

Dual-channel 8 GB DDR4 ECC SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity8GB (2 x 4GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • 8GB (2 x 4GB)
  • 4GB
  • ECC protects data integrity in critical workloads
  • 8GB dual-channel kit (2×4GB) DDR4 2400 CL17 1.2V
  • 260-pin SODIMM fits compatible laptops and microservers
  • Single-rank 1Rx8 layout aids stability on supported platforms
  • Rigorously tested modules with major-brand DRAM ICs

ECC DDR4 SODIMM for workstations

This 8 GB kit contains two 4 GB unbuffered ECC SODIMM modules built for DDR4 systems that require error-correcting memory. It targets microservers, mobile workstations and NAS units where data integrity matters more than raw speed. The dual-channel pair installs in standard 260-pin slots.

Limited to DDR4 2400 ECC platforms

The modules run at DDR4 2400 (PC4-19200) with CL17 latency at 1.2 V. Systems that do not support ECC SODIMM or that lock memory to a lower speed will not benefit from the error-correction feature. Compatibility must be confirmed against the platform's qualified-vendor list before installation.

Single-rank 1Rx8 organisation

Each module uses a 1Rx8 single-rank layout, which determines how the memory controller addresses the chips. Boards that require dual-rank modules or a different rank-per-channel population rule will not recognise the full capacity. Check the system manual for supported rank configurations.

أبرز المميزات

  • ECC protects data integrity in critical workloads
  • 8GB dual-channel kit (2×4GB) DDR4 2400 CL17 1.2V
  • 260-pin SODIMM fits compatible laptops and microservers
  • Single-rank 1Rx8 layout aids stability on supported platforms
  • Rigorously tested modules with major-brand DRAM ICs

المواصفات

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2400T-T ECC SODIMM RAM Kit
Part NumberNE-SS-1626
Capacity8GB (2 x 4GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips / ECC Error Correcting Technology
Recommend UseAMD & Intel Compatible
OptionMajor Brand DRAM IC Chips

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Should I choose the 2x4GB kit or look for a single 8GB module?

The 2x4GB dual-channel kit lets the memory controller interleave data across both modules, giving higher bandwidth than a single 8GB stick at the same 2400 MT/s speed.

What does the 2400 MT/s rating deliver once the modules are installed?

The system will transfer data at up to 2400 million transfers per second per channel, which is the PC4-19200 bandwidth class, provided the platform also supports that rate.

Is the 260-pin DDR4 SO-DIMM interface the limiting factor for speed?

The 260-pin DDR4 SO-DIMM form factor carries the 2400 MT/s signal defined by the PC4-19200 standard; the platform's memory controller ultimately caps the operating frequency.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.