A-Tech 8GB (2x4GB) DDR4 2666 ECC RDIMM 1Rx8 server RAM
- 8GB (2 x 4GB)
- 288-Pin DDR4 SDRAM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
Dual-channel 8 GB DDR4 2666 ECC SODIMM kit with CL19 latency and 1.2 V operation for compatible microservers and workstations
Capacity 8GB (2 x 4GB)
This A-Tech kit supplies eight gigabytes of DDR4 error-correcting memory in two four-gigabyte modules. It targets owners of mobile workstations, microservers or NAS units that require ECC unbuffered SO-DIMMs and cannot use standard non-ECC laptop memory.
The two modules are tested together for dual-channel operation and built with major-brand ICs. ECC error-correcting technology detects and corrects single-bit errors, improving data integrity for workloads that cannot tolerate silent corruption.
The kit runs at DDR4 2666 with a CAS latency of 19 cycles at 1.2 volts. Systems that only support lower speeds or non-ECC modules will not accept this memory, so verify your platform's qualified-vendor list before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 ECC SODIMM Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2666V-T ECC SODIMM RAM Kit |
| Part Number | NE-SS-1628 |
| Capacity | 8GB (2 x 4GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips / ECC Error Correcting Technology |
| Recommend Use | AMD & Intel Compatible |
| Option | Major Brand DRAM IC Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
No firmware updates are required for the unbuffered ECC modules; they operate at standard 1.2V DDR4 voltage and only need correct initial seating in the 260-pin slots.
The modules have no heat spreader, so the DRAM ICs reach their rated operating temperature before any other component, relying on chassis airflow for cooling.
At 1.20 V the two single-rank modules consume minimal power and produce no audible noise, as they contain no moving parts or active cooling.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟