A-Tech 8GB (2x4GB) DDR4 2666 ECC RDIMM 1Rx8 server RAM
- 8GB (2 x 4GB)
- 288-Pin DDR4 SDRAM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
Dual-channel 8 GB DDR4 2666 ECC SODIMM kit with CL19 latency and 1.2 V operation for compatible microservers and workstations
Capacity 8GB (2 x 4GB)
This A-Tech kit supplies eight gigabytes of DDR4 error-correcting memory in two four-gigabyte modules. It targets owners of mobile workstations, microservers or NAS units that require ECC unbuffered SO-DIMMs and cannot use standard non-ECC laptop memory.
The two modules are tested together for dual-channel operation and built with major-brand ICs. ECC error-correcting technology detects and corrects single-bit errors, improving data integrity for workloads that cannot tolerate silent corruption.
The kit runs at DDR4 2666 with a CAS latency of 19 cycles at 1.2 volts. Systems that only support lower speeds or non-ECC modules will not accept this memory, so verify your platform's qualified-vendor list before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 ECC SODIMM Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2666V-T ECC SODIMM RAM Kit |
| Part Number | NE-SS-1628 |
| Capacity | 8GB (2 x 4GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips / ECC Error Correcting Technology |
| Recommend Use | AMD & Intel Compatible |
| Option | Major Brand DRAM IC Chips |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
No firmware updates are required for the unbuffered ECC modules; they operate at standard 1.2V DDR4 voltage and only need correct initial seating in the 260-pin slots.
The modules have no heat spreader, so the DRAM ICs reach their rated operating temperature before any other component, relying on chassis airflow for cooling.
At 1.20 V the two single-rank modules consume minimal power and produce no audible noise, as they contain no moving parts or active cooling.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?