EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8 GB DDR3L 1600 ECC registered DIMM at 1.35 V for Dell server upgrades
This 8GB DDR3L 1600 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It operates at 1.35V low voltage and uses a 2Rx4 rank configuration. The 240-pin DIMM fits systems designed for PC3L-12800 speed.
DDR3L memory runs at 1.35V rather than the standard 1.5V, so the platform must support low-voltage operation. The registered buffer adds one clock cycle of latency and requires a motherboard with a registered DIMM slot. Systems built for unbuffered UDIMMs cannot use this module.
The 2Rx4 organization means the module presents two ranks of x4 chips to the memory controller. Some server platforms limit the number of ranks per channel or require specific rank populations per slot. Verify the system's qualified vendor list before purchasing.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is a single 8 GB DDR3L 1600 registered ECC module; select it if your server needs one 8 GB stick, otherwise choose a kit or capacity that matches your system's supported configuration.
The module operates at DDR3L 1600 with CL11 timing, providing the rated data rate for registered ECC workloads in compatible platforms.
It uses a 240-pin DDR3L form factor at 1.35 V; the lower voltage is backward compatible with 1.5 V DDR3 slots, but the registered ECC design requires a server or workstation motherboard that supports registered memory.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟