暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx4 1.35V server RAM

SKU CH-BNAC-F8W8M

8 GB DDR3L 1600 ECC registered DIMM at 1.35 V for Dell server upgrades

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors in critical workloads
  • Registered signal buffering improves stability in multi-DIMM servers
  • DDR3L 1.35 V operation reduces power draw versus standard DDR3
  • 2Rx4 dual-rank organisation increases memory density per slot
  • 240-pin DIMM form factor fits compatible DDR3L server platforms

8GB DDR3L 1600 ECC RDIMM for Servers

This 8GB DDR3L 1600 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It operates at 1.35V low voltage and uses a 2Rx4 rank configuration. The 240-pin DIMM fits systems designed for PC3L-12800 speed.

DDR3L platform voltage and registered buffer limits

DDR3L memory runs at 1.35V rather than the standard 1.5V, so the platform must support low-voltage operation. The registered buffer adds one clock cycle of latency and requires a motherboard with a registered DIMM slot. Systems built for unbuffered UDIMMs cannot use this module.

2Rx4 rank layout decides compatibility

The 2Rx4 organization means the module presents two ranks of x4 chips to the memory controller. Some server platforms limit the number of ranks per channel or require specific rank populations per slot. Verify the system's qualified vendor list before purchasing.

特長

  • ECC protection prevents data errors in critical workloads
  • Registered signal buffering improves stability in multi-DIMM servers
  • DDR3L 1.35 V operation reduces power draw versus standard DDR3
  • 2Rx4 dual-rank organisation increases memory density per slot
  • 240-pin DIMM form factor fits compatible DDR3L server platforms

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Should I choose the 8 GB module or look for a different capacity?

This listing is a single 8 GB DDR3L 1600 registered ECC module; select it if your server needs one 8 GB stick, otherwise choose a kit or capacity that matches your system's supported configuration.

What does the 1600 MHz rating deliver in my server?

The module operates at DDR3L 1600 with CL11 timing, providing the rated data rate for registered ECC workloads in compatible platforms.

Is the 240-pin DDR3L interface compatible with standard DDR3 slots?

It uses a 240-pin DDR3L form factor at 1.35 V; the lower voltage is backward compatible with 1.5 V DDR3 slots, but the registered ECC design requires a server or workstation motherboard that supports registered memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。