HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ADATA
Turns M.2 SATA SSDs into a 10 Gbps USB-C external drive with included cables and thermal pad
The ADATA EC700G enclosure converts an internal M.2 PCIe or SATA SSD into an external USB-C drive. It accepts 2280, 2242 and 2230 form factors and delivers up to 10 Gbps bandwidth via USB 3.2 Gen 2. Compatible with Windows, macOS, Linux and Android devices.
Installation follows a simple three-step process: open the case, insert the M.2 drive and secure it with the included thermal pad, then close the cover. Both USB-C to C and USB-C to A cables are supplied for broad host compatibility. No drivers are required on supported operating systems.
With a PCIe or SATA SSD installed, the enclosure can reach sequential speeds up to 1000 MB/s, roughly 12.5 times faster than ordinary external hard drives. A 10 GB file transfers in about 20 seconds. Performance is limited by the drive's own maximum throughput and the host port's generation.
| Brand | A-DATA |
|---|---|
| Model | AEC700GU32G2-CGY |
| Part Number | AEC700GU32G2-CGY |
| Color | Black |
| Type | Enclosure |
| Internal Interface | M.2 M key /M+B Key |
| External Interface | USB 3.2 Gen 2 Type-C 10Gbps (USB 10Gbps) (backward compatible with USB 2.0) |
| Features | Windows 8 / 8.1 / 10 Mac OS X 10.6 or later (reformatting required for use) Linux Kernel 2.6 or later Android 5.0 or later with no device driver needed USB 3.2 Type-C to C cable USB 3.2 Type-C to A cable Thermal Pad Quick Installation Guide |
| Dimensions | 112 x 45 x 12.24mm / 4.4 x 1.77 x 0.48inch |
| Weight | 90g / 3.2oz |
Connect it via the USB 3.2 Type-C to C cable, verify the drive appears in your OS file manager, then transfer a test file and confirm speeds approach the 1000 MB/s spec.
The box contains the enclosure, a USB 3.2 Type-C to C cable, a USB 3.2 Type-C to A cable, a thermal pad and a quick installation guide; you must provide your own M.2 SSD.
The enclosure accepts M.2 2230, 2242 and 2280 modules with either M key or M+B key interfaces.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟