نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Gold-coloured rectangular ASIC miner with two front fans

AFRNDK

AFRNDK Gold-shell Echo E-DG1M 3.4Gh/s 1800W mining hardware

SKU CH-6E0B-970Z3

ASIC miner delivering 3.4 Gh/s on Scrypt for LTC, DOGE and BEL at 1800 W with 50 dB air cooling

  • TypeMining Machine/Miner
  • Compatible CurrencyLTCDOGE,BEL
  • Mining HardwareASIC
  • Hashrate3.4Gh/s
  • Noise level50dB
  • Fan2
  • Efficient 3.4 Gh/s Scrypt mining for LTC, DOGE, BEL
  • 1800 W power draw needs a capable 110 V home circuit
  • Quiet 50 dB operation from dual fans suits living spaces
  • Air cooling keeps chips stable from 5 °C to 45 °C ambient
  • Ethernet link and 5–95 % humidity tolerance simplify setup

Gold-shell Echo E-DG1M ASIC Miner

The Gold-shell Echo E-DG1M is an ASIC miner built for Scrypt-based currencies such as Litecoin, Dogecoin and BEL. It delivers a rated hashrate of 3.4Gh/s while drawing 1800W from a 110V supply. The unit ships with an integrated power supply and connects via Ethernet for pool communication. It is intended for home or small-scale operators who can provide the required electrical circuit.

Sustained Load Behaviour

During continuous operation the miner maintains its 3.4Gh/s output at a steady 1800W draw. Two onboard fans keep internal temperatures within the rated 5 to 45 °C range, producing an acoustic level of 50dB. The chassis exhausts enough heat to raise ambient room temperature, so adequate ventilation is necessary for stable long-term running. Humidity tolerance spans 5 to 95 % non-condensing.

Build and Connectivity

The enclosure uses air cooling with dual fans mounted for front-to-rear airflow. A single Ethernet port provides the sole data link, simplifying network integration. The integrated PSU removes the need for an external power brick, but the 1800W load demands a dedicated 110V circuit rated for sustained current. No additional mounting hardware or specialised connectors are required beyond standard mains and RJ45 cabling.

أبرز المميزات

  • Efficient 3.4 Gh/s Scrypt mining for LTC, DOGE, BEL
  • 1800 W power draw needs a capable 110 V home circuit
  • Quiet 50 dB operation from dual fans suits living spaces
  • Air cooling keeps chips stable from 5 °C to 45 °C ambient
  • Ethernet link and 5–95 % humidity tolerance simplify setup

المواصفات

BrandGold-shell
SeriesEDG1M
ModelE-DG1M
TypeMining Machine/Miner
Compatible CurrencyLTCDOGE,BEL
Mining HardwareASIC
Hashrate3.4Gh/s
Noise level50dB
Fan2
Power Consumption1800w

أسئلة حول هذا المنتج

How loud is the E-DG1M when it runs 24/7 at 50 dB?

The miner produces 50 dB of noise from its two fans, which is comparable to a quiet office and generally acceptable for a home environment if placed in a separate room.

What electrical circuit do I need to support the 1800 W power draw?

The unit requires a 110 V circuit capable of delivering 1800 W continuously; verify your home wiring and breaker can handle this sustained load before installation.

Will the Ethernet interface work with my existing router and older switches?

Yes, the Ethernet port connects to any standard router or switch; no special networking hardware is required beyond a typical wired LAN connection.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.