EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Antminer
Mines Dogecoin using the Scrypt algorithm at 15 GH/s while drawing 3150 W with a built-in power supply
The Antminer L9 delivers a typical hashrate of 15 GH/s for the Scrypt algorithm, making it suitable for mining Dogecoin and other compatible currencies. It operates on 220-277V AC input with a built-in power supply and draws up to 3150 W at the wall. Typical power efficiency is 210 J/GH with actual values fluctuating by ±5%. The unit weighs 14.2 kg and measures 400×195×290 mm.
Replacing older Scrypt hardware with the L9 raises hashrate to 15 GH/s while keeping power efficiency at 210 J/GH, reducing energy cost per coin when electricity rates are stable. The jump is worth it when the higher output offsets the 3150 W draw and the 75 dBA noise level fits the operating environment. Hashrate may vary by ±3% and power by ±5% in practice.
Connect the RJ45 Ethernet 10/100M port to the network and supply 220-277V AC at up to 20 A single-phase; wrong input voltage may damage the server. Ensure ambient temperature stays within -20°C to 45°C and humidity 10-90% RH non-condensing at altitudes up to 2000 m. Fans run at max RPM under peak load, so plan airflow and noise isolation accordingly.
| Brand | Antminer |
|---|---|
| Series | Antminer L9 |
| Model | Antminer L9 15GH |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin (DOGE) |
| Mining Hardware | ASIC |
| Hashrate | 15 GH/s |
| Network Connection | RJ45 Ethernet 10/100M |
| Noise level | 75 dBA |
| Power Supply | Built-in Power Supply |
| Power Consumption | 3150 Watt |
| Power Efficiency | 210 J/GH |
| Operation Temperature | -20~45 °C |
| Storage Temperature | -40~70 °C |
| Operation Humidity | 10~90% RH |
| Dimension | 400*195*290 mm |
| Weight | 14.2 KG |
| Package Content | 570*316*430 mm |
Allow at least 100 mm free space at the front fan wall and 150 mm at the rear exhaust so the 75 dBA airflow can move through the -20 to 45 °C operating envelope without recirculation.
Verify the circuit breaker is rated for 20 A, connect the IEC cord to the built-in PSU before powering on, then link the RJ45 Ethernet 10/100M port; skipping the breaker check is the step most often missed.
Plan a visual check every 180 days; if bearing noise rises above the baseline 75 dBA or RPM drops below the max-condition spec, swap both fans to keep the 210 J/GH efficiency target.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟