EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
APEVIA CORP.
Delivers 600 W via a single +12 V rail with 80 PLUS Bronze efficiency and a 135 mm fan
The APEVIA Jupiter Series ATX-JP600W is a 600 W ATX12V power supply built for desktop builds and system upgrades. Its single +12V rail delivers up to 44 A to feed multi-core CPUs and graphics cards. 80 PLUS Bronze certification guarantees at least 82 % efficiency from 20 % to 100 % load. A thermally-controlled 135 mm fan handles forced-air cooling.
Verify that the case can accept a unit up to 160 mm long and that the mains supply matches the 115 V to 230 V input range. The main connector is a 20/24-pin plug, and two 6+2-pin PCI-Express leads are provided for graphics cards. Four SATA power connectors are included for drives. Hold-up time is rated at 17 ms at full load.
The single-rail design simplifies cable routing because all +12V current comes from one source. SLI and CrossFire support means the supply can run dual-GPU configurations without extra adapters. Haswell compatibility ensures the low-power sleep states are supported. Output rails are held within 5 % tolerance on +3.3 V, +5 V and +12 V for stable operation.
| Brand | APEVIA |
|---|---|
| Series | Jupiter Series |
| Model | ATX-JP600W |
| Type | ATX12V |
| Maximum Power | 600 W |
| Fans | Forced Air Ventilation by 1 x 135mm fan |
| Main Connector | 1 x 20/24pin Main Power |
| +12V Rails | Single |
| PCI-Express Connector | 2 x 6+2-Pin |
| SATA Power Connector | 4 |
| SLI | Yes |
| Haswell Support | Yes |
| CrossFire | Yes |
| Max PSU Length | 160 mm |
| Hold-up Time | 17ms at Full Load normal Line Input Voltage |
| Energy-Efficient | 80 PLUS BRONZE Certified |
| Input Voltage | 115V - 230V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8A @ 115V, 4A @ 230V |
| Output | +3.3V@20A, +5V@20A, +12V@44A, [email protected] , [email protected] |
| Connectors | 1 x 20/24pin Main Power 1 x 4/8 pin + 12V and EPS 4 x SATA 4 x Peripheral 1 x Floppy 2 x 6+2pin PCI Express |
| Features | 600W Power with 13.5cm black fan 80+ Bronze certified High stability with 5% tolerance of 5V, 3.3V & 12V output High quality components and housing Low noise auto-thermally control 135mm fan Supports single 12v output for higher power usage Universal AC input by active PFC (99%PF Typical) Supports SLI, Crossfire & Haswell 20 + 4 pin main connector can be used for 20 pin or 24 pin 4/8 Pin ATX 12V connector 2 x 6+2 Pin PCI - Express 4 x SATA connector 4 x 4 pin peripheral connector 1 x floppy connector Look at the label |
| Dimensions | 3.40" x 5.90" x 6.30" |
| Weight | 5.00 lbs. |
| وزن الشحنة | 1.93 kg |
| أبعاد الطرد | 246 × 188 × 104 mm |
The unit measures 160 mm long, so it fits most mid-tower cases that accept standard ATX power supplies.
It includes two 6+2-pin PCIe connectors, each able to serve as an 8-pin plug for modern GPUs.
At least 82 % efficiency between 20 % and 100 % load reduces waste heat, letting the 135 mm fan run quieter.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟