Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Rectangular metal power supply unit with large 135mm fan grille and modular cable connectors visible

APEVIA CORP.

APEVIA CORP. ATX-JP600W 600 W power supply

SKU CH-E53Y-10FXD MPN ATX-JP600W

Delivers 600 W via a single +12 V rail with 80 PLUS Bronze efficiency and a 135 mm fan

  • TypeATX12V
  • Maximum Power600 W
  • FansForced Air Ventilation by 1 x 135mm fan
  • Main Connector1 x 20/24pin Main Power
  • +12V RailsSingle
  • PCI-Express Connector2 x 6+2-Pin
  • 80 PLUS Bronze certification delivers at least 82% efficiency across 20% to 100% load
  • Single +12V rail supplies 44 A for stable multi-core CPU and GPU power
  • Two 6+2-pin PCIe connectors enable SLI and CrossFire multi-GPU configurations
  • 135 mm thermally-controlled fan adjusts speed to remove heat quietly
  • 160 mm depth fits standard ATX cases for straightforward installation

Jupiter Series 600 W ATX power supply

The APEVIA Jupiter Series ATX-JP600W is a 600 W ATX12V power supply built for desktop builds and system upgrades. Its single +12V rail delivers up to 44 A to feed multi-core CPUs and graphics cards. 80 PLUS Bronze certification guarantees at least 82 % efficiency from 20 % to 100 % load. A thermally-controlled 135 mm fan handles forced-air cooling.

Check your build before ordering

Verify that the case can accept a unit up to 160 mm long and that the mains supply matches the 115 V to 230 V input range. The main connector is a 20/24-pin plug, and two 6+2-pin PCI-Express leads are provided for graphics cards. Four SATA power connectors are included for drives. Hold-up time is rated at 17 ms at full load.

Integration and headroom

The single-rail design simplifies cable routing because all +12V current comes from one source. SLI and CrossFire support means the supply can run dual-GPU configurations without extra adapters. Haswell compatibility ensures the low-power sleep states are supported. Output rails are held within 5 % tolerance on +3.3 V, +5 V and +12 V for stable operation.

Pontos fortes

  • 80 PLUS Bronze certification delivers at least 82% efficiency across 20% to 100% load
  • Single +12V rail supplies 44 A for stable multi-core CPU and GPU power
  • Two 6+2-pin PCIe connectors enable SLI and CrossFire multi-GPU configurations
  • 135 mm thermally-controlled fan adjusts speed to remove heat quietly
  • 160 mm depth fits standard ATX cases for straightforward installation

Especificações

BrandAPEVIA
SeriesJupiter Series
ModelATX-JP600W
TypeATX12V
Maximum Power600 W
FansForced Air Ventilation by 1 x 135mm fan
Main Connector1 x 20/24pin Main Power
+12V RailsSingle
PCI-Express Connector2 x 6+2-Pin
SATA Power Connector4
SLIYes
Haswell SupportYes
CrossFireYes
Max PSU Length160 mm
Hold-up Time17ms at Full Load normal Line Input Voltage
Energy-Efficient80 PLUS BRONZE Certified
Input Voltage115V - 230V
Input Frequency Range50/60 Hz
Input Current8A @ 115V, 4A @ 230V
Output+3.3V@20A, +5V@20A, +12V@44A, [email protected] , [email protected]
Connectors1 x 20/24pin Main Power
1 x 4/8 pin + 12V and EPS
4 x SATA
4 x Peripheral
1 x Floppy
2 x 6+2pin PCI Express
Features600W Power with 13.5cm black fan
80+ Bronze certified
High stability with 5% tolerance of 5V, 3.3V & 12V output
High quality components and housing
Low noise auto-thermally control 135mm fan
Supports single 12v output for higher power usage
Universal AC input by active PFC (99%PF Typical)
Supports SLI, Crossfire & Haswell
20 + 4 pin main connector can be used for 20 pin or 24 pin
4/8 Pin ATX 12V connector
2 x 6+2 Pin PCI - Express
4 x SATA connector
4 x 4 pin peripheral connector
1 x floppy connector
Look at the label
Dimensions3.40" x 5.90" x 6.30"
Weight5.00 lbs.
Peso de envio1.93 kg
Dimensões da embalagem246 × 188 × 104 mm

Perguntas sobre este artigo

Will the 160 mm length fit a mid-tower case with limited clearance?

The unit measures 160 mm long, so it fits most mid-tower cases that accept standard ATX power supplies.

Can this supply run a graphics card that needs two 8-pin connectors?

It includes two 6+2-pin PCIe connectors, each able to serve as an 8-pin plug for modern GPUs.

Does the 80 PLUS Bronze rating mean lower heat and noise in daily use?

At least 82 % efficiency between 20 % and 100 % load reduces waste heat, letting the 135 mm fan run quieter.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.