نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

DELL

DELL 1.92TB SATA Enterprise SSD SE5031 GKTF1

SKU CH-E8PY-33RVY

1.92 TB SATA enterprise SSD built for mixed-use workloads in 2.5-inch Dell PowerEdge servers

  • InterfaceSATA
  • 92 TB capacity supports large enterprise workloads
  • SATA 6 Gbps interface integrates with existing server storage
  • Mixed-use TLC flash balances read and write endurance
  • 7 mm 2.5-inch form factor fits Dell PowerEdge drive bays
  • Tested components with updated firmware ensure reliable deployment

Dell SE5031 Enterprise SATA SSD

This Dell SE5031 drive provides 1.92TB of capacity over a 6Gbps SATA interface. It uses mixed-use TLC flash in a 7mm 2.5-inch form factor. The drive targets servers and storage arrays that need reliable read/write performance for databases, virtualization or general-purpose workloads. Firmware is updated and each unit is tested before shipment.

Sustained mixed-use endurance

Mixed-use TLC architecture balances read and write cycles so the drive maintains steady throughput under continuous database or virtualization loads. Enterprise-grade firmware manages wear levelling and power-loss protection to prevent performance drops during extended write sequences. The SATA 6Gbps link delivers consistent bandwidth without the thermal throttling seen in smaller form factors.

Upgrade path for legacy SATA bays

This SSD replaces mechanical 2.5-inch drives or lower-capacity SATA SSDs in compatible PowerEdge servers. The jump is worthwhile when latency-sensitive applications outgrow HDD random IOPS or when older SATA SSDs reach write-endurance limits. It fits existing 7mm drive bays and backplanes without caddy changes or controller upgrades.

أبرز المميزات

  • 92 TB capacity supports large enterprise workloads
  • SATA 6 Gbps interface integrates with existing server storage
  • Mixed-use TLC flash balances read and write endurance
  • 7 mm 2.5-inch form factor fits Dell PowerEdge drive bays
  • Tested components with updated firmware ensure reliable deployment

المواصفات

BrandDell
ModelHFS1T9G32FEH-BA10A
InterfaceSATA

أسئلة حول هذا المنتج

How much heat and power does the 1.92TB SATA SSD draw when running continuously in a server?

The drive uses a standard SATA interface and 7 mm 2.5 inch form factor, so power and thermal output match typical enterprise SATA SSDs in that class.

What drive bay or adapter is needed to install this 2.5 inch 7 mm SATA SSD?

It fits any 2.5 inch SATA bay that accepts a 7 mm height drive; no extra adapter is required if the bay matches that size.

Will this SSD work in my older PowerEdge R740 alongside existing drives?

Yes, the drive is listed as compatible with the PowerEdge R740 and other servers in the same generation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.